[64465] in North American Network Operators' Group
Re: No "encapsulation" command on IOS 12.2(12a) ??
daemon@ATHENA.MIT.EDU (Owen DeLong)
Fri Oct 24 09:03:24 2003
Date: Fri, 24 Oct 2003 05:59:50 -0700
From: Owen DeLong <owen@delong.com>
To: Roman Volf <volfman@keystreams.com>, nanog@merit.edu
In-Reply-To: <1272.66.27.127.38.1066988955.squirrel@webmail.keystreams.com>
Errors-To: owner-nanog-outgoing@merit.edu
--==========856870887==========
Content-Type: text/plain; charset=us-ascii; format=flowed
Content-Transfer-Encoding: quoted-printable
Content-Disposition: inline
int ethernet 0/0.0
encap 802.1q 532
You can't spec the encap on the parent interface. You must do it on the sub int.
Owen
--On Friday, October 24, 2003 02:49:15 AM -0700 Roman Volf <volfman@keystreams.com> wrote:
>
> Show Version:
>
> Cisco Internetwork Operating System Software
> IOS (tm) 3600 Software (C3620-I-M), Version 12.2(12a), RELEASE SOFTWARE (fc1)
>
> flash image:
> System image file is "flash:c3620-i-mz.122-12a.bin"
>
>
> I'm trying to configure a FastEthernet sub interface for 802.1q VLANs, but
> theres no encapsulation command. I've googled it up for about 2 hours and
> have come up with nothing... the following command sequence is documented
> dozens of times:
>
> As shown on:
>
> http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120t/120t1/8021q.htm#wp3944
> interface fastethernet slot/port.subinterface-number
> encapsulation dot1q vlanid
>
>
> Any help would be appreciated.
--==========856870887==========
Content-Type: application/pgp-signature
Content-Transfer-Encoding: 7bit
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.1 (GNU/Linux)
iD8DBQE/mSJGn5zKWQ/iqj0RAivPAJ9N2FEUKl3dfUent0iVd7v+uq6uqACeIybr
iM+NwU0UgddV8L9O1INkXsQ=
=775S
-----END PGP SIGNATURE-----
--==========856870887==========--
