[64459] in North American Network Operators' Group
RE: No "encapsulation" command on IOS 12.2(12a) ??
daemon@ATHENA.MIT.EDU (Temkin, David)
Fri Oct 24 08:17:47 2003
From: "Temkin, David" <temkin@sig.com>
To: "'Roman Volf'" <volfman@keystreams.com>, nanog@merit.edu
Date: Fri, 24 Oct 2003 08:15:39 -0400
Errors-To: owner-nanog-outgoing@merit.edu
Kind of OT for NANOG, you should go to cisco-nsp for these kinds of
questions.
However, to answer your question anyway you need an IP plus version of IOS
to get 802.1q/ISL subifs on a 36xx router. That's only plain IP (c3620-i
vs. c3620-is)
-----Original Message-----
From: Roman Volf [mailto:volfman@keystreams.com]
Sent: Friday, October 24, 2003 5:49 AM
To: nanog@merit.edu
Subject: No "encapsulation" command on IOS 12.2(12a) ??
Show Version:
Cisco Internetwork Operating System Software
IOS (tm) 3600 Software (C3620-I-M), Version 12.2(12a), RELEASE SOFTWARE
(fc1)
flash image:
System image file is "flash:c3620-i-mz.122-12a.bin"
I'm trying to configure a FastEthernet sub interface for 802.1q VLANs, but
theres no encapsulation command. I've googled it up for about 2 hours and
have come up with nothing... the following command sequence is documented
dozens of times:
As shown on:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120
t/120t1/8021q.htm#wp3944
interface fastethernet slot/port.subinterface-number encapsulation dot1q
vlanid
Any help would be appreciated.
