[64468] in North American Network Operators' Group
Re: No "encapsulation" command on IOS 12.2(12a) ??
daemon@ATHENA.MIT.EDU (Fergie (Paul Ferguson))
Fri Oct 24 09:15:29 2003
X-Original-From: "Fergie (Paul Ferguson)" <fergdawg@netzero.net>
Date: Fri, 24 Oct 2003 13:11:50 GMT
To: owen@delong.com
Cc: volfman@keystreams.com, nanog@merit.edu
From: "Fergie (Paul Ferguson)" <fergdawg@netzero.net>
Errors-To: owner-nanog-outgoing@merit.edu
And if all else fails, of course, you should contact cisco
tech support folks, not NANOG folk.
- ferg
Owen writes:
============
int ethernet 0/0.0
encap 802.1q 532
You can't spec the encap on the parent interface. You must do it on the sub
int.
Owen
--On Friday, October 24, 2003 02:49:15 AM -0700 Roman Volf <volfman@keystreams.com> wrote:
>
> Show Version:
>
> Cisco Internetwork Operating System Software
> IOS (tm) 3600 Software (C3620-I-M), Version 12.2(12a), RELEASE SOFTWARE
(fc1)
>
> flash image:
> System image file is "flash:c3620-i-mz.122-12a.bin"
>
>
> I'm trying to configure a FastEthernet sub interface for 802.1q VLANs, but
> theres no encapsulation command. I've googled it up for about 2 hours and
> have come up with nothing... the following command sequence is documented
> dozens of times:
>
> As shown on:
>
> http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120t/120t1/8021q.htm#wp3944
> interface fastethernet slot/port.subinterface-number
> encapsulation dot1q vlanid
>
>
> Any help would be appreciated.
--
"Fergie", a.k.a. Paul Ferguson
Engineering Architecture for the Intern
ferguson@employees.org or
fergdawg@netzero.net
