[64480] in North American Network Operators' Group
Re: No "encapsulation" command on IOS 12.2(12a) ??
daemon@ATHENA.MIT.EDU (Jay Hennigan)
Fri Oct 24 12:41:20 2003
Date: Fri, 24 Oct 2003 09:40:47 -0700 (PDT)
From: Jay Hennigan <jay@west.net>
To: Roman Volf <volfman@keystreams.com>
Cc: nanog@merit.edu
In-Reply-To: <1272.66.27.127.38.1066988955.squirrel@webmail.keystreams.com>
Errors-To: owner-nanog-outgoing@merit.edu
On Fri, 24 Oct 2003, Roman Volf wrote:
> Show Version:
>
> Cisco Internetwork Operating System Software
> IOS (tm) 3600 Software (C3620-I-M), Version 12.2(12a), RELEASE SOFTWARE (fc1)
>
> flash image:
> System image file is "flash:c3620-i-mz.122-12a.bin"
>
>
> I'm trying to configure a FastEthernet sub interface for 802.1q VLANs, but
> theres no encapsulation command. I've googled it up for about 2 hours and
> have come up with nothing... the following command sequence is documented
> dozens of times:
>
> Any help would be appreciated.
You have an IP-only image as shown by the c3620-i in the filename. For
VLAN support you need at least an "Plus" image. Depending on your hardware
this may require more RAM and/or flash.
--
Jay Hennigan - CCIE #7880 - Network Administration - jay@west.net
WestNet: Connecting you to the planet. 805 884-6323 WB6RDV
NetLojix Communications, Inc. - http://www.netlojix.com/
