[127270] in North American Network Operators' Group
daemon@ATHENA.MIT.EDU (Mike Ruiz)
Fri Jun 18 16:13:33 2010
Date: Fri, 18 Jun 2010 15:13:08 -0500
From: "Mike Ruiz" <mruiz@lstfinancial.com>
To: <nanog@nanog.org>
Errors-To: nanog-bounces+nanog.discuss=bloom-picayune.mit.edu@nanog.org
Ok here we go. I know the subject is a little ambiguous, please allow =
to explain.
=20
I have a network of 192.168.1.0/24 and I need it to reach a network =
10.0.1.0/27 only when it needs to be accessed by specific machines that =
reside on the 192.168.1.0/24 network. =20
=20
=20
192.168.1.10 =E0 NAT =E010.0.1.10 =E0 route that packet to 10.0.1.1. =20
=20
I only want specific host to route to that specific /27 network .
=20
Any help would be appreciated. So far what I have gathered is only for =
VPN connections but I do not want to build a VPN. Thank you again in =
advance.=20
=20
=20
Michael Ruiz
Network Engineer
=20
"If you tell people where to go, but not how to get there, you'll be =
amazed at the results." -- General George S. Patton Jr.
=20
=20
