[127288] in North American Network Operators' Group
Re:
daemon@ATHENA.MIT.EDU (Mike Ruiz)
Sat Jun 19 12:59:24 2010
Date: Sat, 19 Jun 2010 11:58:57 -0500
From: "Mike Ruiz" <mruiz@lstfinancial.com>
To: <Greg.Whynott@oicr.on.ca>, "Mike Ruiz" <mruiz@lstfinancial.com>,
<nanog@nanog.org>
Errors-To: nanog-bounces+nanog.discuss=bloom-picayune.mit.edu@nanog.org
Ok cool. That is similar to what I have. Thank you.=20
--------------------------
Sent using BlackBerry
-----Original Message-----
From: Greg Whynott <Greg.Whynott@oicr.on.ca>
To: Mike Ruiz <mruiz@lstfinancial.com>; nanog@nanog.org =
<nanog@nanog.org>
Sent: Sat Jun 19 11:02:48 2010
Subject: RE: <NAT translation from a sourced network to a destination =
network>
depending on your vendor equipment you'll need an ACL or a route map to =
define the traffic you wish to Nat and apply it to the 'nat engine'.=20
if you are doing this on cisco ASA or similar it might look something =
like this:
-define the interesting traffic with an ACL:
access-list 110 permit ip 192.168.1.0 0.0.0.255 10.0.1.0 0.0.0.31
access-list 110 deny ip any any
- create a route-map:
route-map natme permit 10
match ip address 110
- apply the map:
ip nat inside source route-map natme interface GigabitEthernet0/1 =
overload
hope that helps.
-g
________________________________________
From: Mike Ruiz [mruiz@lstfinancial.com]
Sent: Friday, June 18, 2010 4:13 PM
To: nanog@nanog.org
Subject: <NAT translation from a sourced network to a destination =
network>
Ok here we go. I know the subject is a little ambiguous, please allow =
to explain.
I have a network of 192.168.1.0/24 and I need it to reach a network =
10.0.1.0/27 only when it needs to be accessed by specific machines that =
reside on the 192.168.1.0/24 network.
192.168.1.10 =E0 NAT =E010.0.1.10 =E0 route that packet to 10.0.1.1.
I only want specific host to route to that specific /27 network .
Any help would be appreciated. So far what I have gathered is only for =
VPN connections but I do not want to build a VPN. Thank you again in =
advance.
Michael Ruiz
Network Engineer
"If you tell people where to go, but not how to get there, you'll be =
amazed at the results." -- General George S. Patton Jr.
