[113243] in North American Network Operators' Group
Re: L2 - L3 Etherchannel
daemon@ATHENA.MIT.EDU (Amolak)
Thu Apr 9 06:44:19 2009
In-Reply-To: <20b13c6b0904081317w8e33e1cv15dc0c60aa7bebc6@mail.gmail.com>
Date: Thu, 9 Apr 2009 16:12:11 +0530
From: Amolak <amolak.singh@gmail.com>
To: nanog@nanog.org
Errors-To: nanog-bounces+nanog.discuss=bloom-picayune.mit.edu@nanog.org
Thanks guys.
-Amolak
On Thu, Apr 9, 2009 at 1:47 AM, Arie Vayner <arievayner@gmail.com> wrote:
> Yes.
>
>
> On Wed, Apr 8, 2009 at 9:03 PM, Amolak <amolak.singh@gmail.com> wrote:
>
>> Hi All,
>>
>> Is it possible to create L2 Etherchannel at one end and L3 etherchannel at
>> another end?
>>
>> For Example:
>>
>> SW-1
>> ====
>>
>> interface GigabitEthernet1/1
>> channel-group 1 mode desirable
>> channel-protocol pagp
>> !
>> interface GigabitEthernet1/2
>> channel-group 1 mode desirable
>> channel-protocol pagp
>> !
>> interface Port-channel 1
>> no ip address
>> switchport
>> switchport access vlan 10
>> switchport mode access
>> !
>> int vlan10
>> ip address 1.1.1.1 255.255.255.252
>> !
>> ------------------------------------
>>
>> SW-2
>> ====
>>
>> interface Port-channel 2
>> ip address 1.1.1.2 255.255.255.252
>> !
>> interface GigabitEthernet1/1
>> no ip address
>> channel-group 2 mode desirable
>> channel-protocol pagp
>> !
>> interface GigabitEthernet1/2
>> no ip address
>> channel-group 2 mode desirable
>> channel-protocol pagp
>> !
>>
>> I don't have a lab to test it, can somebody confirm if the connectivity
>> will
>> work between these devices as per this setup.
>>
>> Thanks,
>> Amolak
>>
>
>
