[113227] in North American Network Operators' Group
L2 - L3 Etherchannel
daemon@ATHENA.MIT.EDU (Amolak)
Wed Apr 8 14:05:36 2009
Date: Wed, 8 Apr 2009 23:33:33 +0530
From: Amolak <amolak.singh@gmail.com>
To: nanog@nanog.org
Errors-To: nanog-bounces+nanog.discuss=bloom-picayune.mit.edu@nanog.org
Hi All,
Is it possible to create L2 Etherchannel at one end and L3 etherchannel at
another end?
For Example:
SW-1
====
interface GigabitEthernet1/1
channel-group 1 mode desirable
channel-protocol pagp
!
interface GigabitEthernet1/2
channel-group 1 mode desirable
channel-protocol pagp
!
interface Port-channel 1
no ip address
switchport
switchport access vlan 10
switchport mode access
!
int vlan10
ip address 1.1.1.1 255.255.255.252
!
------------------------------------
SW-2
====
interface Port-channel 2
ip address 1.1.1.2 255.255.255.252
!
interface GigabitEthernet1/1
no ip address
channel-group 2 mode desirable
channel-protocol pagp
!
interface GigabitEthernet1/2
no ip address
channel-group 2 mode desirable
channel-protocol pagp
!
I don't have a lab to test it, can somebody confirm if the connectivity will
work between these devices as per this setup.
Thanks,
Amolak
