[113229] in North American Network Operators' Group
Re: L2 - L3 Etherchannel
daemon@ATHENA.MIT.EDU (Arie Vayner)
Wed Apr 8 16:19:28 2009
In-Reply-To: <fc3d36f0904081103y14f405dct1187c0551187d2a@mail.gmail.com>
From: Arie Vayner <arievayner@gmail.com>
Date: Wed, 8 Apr 2009 23:17:10 +0300
To: Amolak <amolak.singh@gmail.com>
Cc: nanog@nanog.org
Errors-To: nanog-bounces+nanog.discuss=bloom-picayune.mit.edu@nanog.org
Yes.
On Wed, Apr 8, 2009 at 9:03 PM, Amolak <amolak.singh@gmail.com> wrote:
> Hi All,
>
> Is it possible to create L2 Etherchannel at one end and L3 etherchannel at
> another end?
>
> For Example:
>
> SW-1
> ====
>
> interface GigabitEthernet1/1
> channel-group 1 mode desirable
> channel-protocol pagp
> !
> interface GigabitEthernet1/2
> channel-group 1 mode desirable
> channel-protocol pagp
> !
> interface Port-channel 1
> no ip address
> switchport
> switchport access vlan 10
> switchport mode access
> !
> int vlan10
> ip address 1.1.1.1 255.255.255.252
> !
> ------------------------------------
>
> SW-2
> ====
>
> interface Port-channel 2
> ip address 1.1.1.2 255.255.255.252
> !
> interface GigabitEthernet1/1
> no ip address
> channel-group 2 mode desirable
> channel-protocol pagp
> !
> interface GigabitEthernet1/2
> no ip address
> channel-group 2 mode desirable
> channel-protocol pagp
> !
>
> I don't have a lab to test it, can somebody confirm if the connectivity
> will
> work between these devices as per this setup.
>
> Thanks,
> Amolak
>
