[6076] in linux-scsi channel archive
AHA-2940,
daemon@ATHENA.MIT.EDU (Kenneth Johansson)
Fri Mar 12 07:35:06 1999
Date: Fri, 12 Mar 1999 13:24:31 +0100
From: Kenneth Johansson <erakeon@kieraypc01.p.y.ki.era.ericsson.se>
To: linux-scsi@vger.rutgers.edu
I have a problem with my IBM disk. Can someone tell me what
"sense key not ready" means. Is it really bad or a configuration error.
I can use the disk for a long time befor this happens. I think it
has something to do with the sony tape drive I have not had the problem
before the first use of the tape drive. I have currently disabled the backup
program so it should not be used.
Kernel version is 2.2.2 and 2.2.3. Everything is new so this is the only
kernels that I have tested.
--------------
(scsi0) <Adaptec AHA-294X Ultra SCSI host adapter> found at PCI 13/0
(scsi0) Wide Channel, SCSI ID=7, 16/255 SCBs
(scsi0) Warning - detected auto-termination
(scsi0) Please verify driver detected settings are correct.
(scsi0) If not, then please properly set the device termination
(scsi0) in the Adaptec SCSI BIOS by hitting CTRL-A when prompted
(scsi0) during machine bootup.
(scsi0) Cables present (Int-50 YES, Int-68 YES, Ext-68 NO)
(scsi0) Downloading sequencer code... 419 instructions downloaded
scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.1.10/3.2.4
<Adaptec AHA-294X Ultra SCSI host adapter>
scsi : 1 host.
Vendor: IBM Model: DRVS09V Rev: 00F0
Type: Direct-Access ANSI SCSI revision: 03
Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
(scsi0:0:0:0) Synchronous at 40.0 Mbyte/sec, offset 8.
Vendor: SONY Model: SDT-7000 Rev: 0300
Type: Sequential-Access ANSI SCSI revision: 02
(scsi0:0:1:0) Synchronous at 10.0 Mbyte/sec, offset 15.
scsi : detected 1 SCSI disk total.
SCSI device sda: hdwr sector= 512 bytes. Sectors= 17928698 [8754 MB] [8.8 GB]
--------------
kernel: SCSI disk error : host 0 channel 0 id 0 lun 0 return code = 28000002
kernel: extra data not valid Current error sd08:01: sense key Not Ready
kernel: Additional sense indicates Logical unit not ready, initializing command required
kernel: scsidisk I/O error: dev 08:01, sector 2245530
kernel: SCSI disk error : host 0 channel 0 id 0 lun 0 return code = 28000002
kernel: extra data not valid Current error sd08:01: sense key Not Ready
kernel: Additional sense indicates Logical unit not ready, initializing command required
kernel: scsidisk I/O error: dev 08:01, sector 15467734
kernel: Remounting filesystem read-only
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.rutgers.edu
