[4553] in linux-scsi channel archive
Re: Problems with CD-R
daemon@ATHENA.MIT.EDU (georg_funke@geocities.com)
Sat Aug 15 12:28:41 1998
Date: Sat, 15 Aug 1998 18:26:31 +0200 (CEST)
From: georg_funke@geocities.com
To: cbrown@denalics.net
cc: linux-scsi@vger.rutgers.edu
In-Reply-To: <Pine.LNX.3.96.980815040053.18216B-100000@borg.denalics.net>
On 15 Aug, Christopher E. Brown wrote:
> On Wed, 12 Aug 1998 georg_funke@geocities.com wrote:
>
>> cdrecord: Success. write_g1: scsi sendcmd: retryable error
>> CDB: 2A 00 00 01 5C 36 00 00 0D 00
>> status: 0x2 (CHECK CONDITION)
>> Sense Bytes: F0 00 03 01 5A B4 0A 00 00 00 00 0C 00 00 00
>> Sense Key: 0x3 Medium Error, Segment 0
>> Sense Code: 0x0C Qual 0x00 (write error) Fru 0x0
>> sense flags: BLK 88756 (valid)
>> cmd finished after 0.186s. timeout 40s
>> write track data: error after 1314768 Bytes
>> Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00
>> cdrecord: Success. flush cache: scsi sendcmd: retryable error
>> CDB: 35 00 00 00 00 00 00 00 00 00
>> Status: 0x2 (CHECK CONDITION)
>> Sense Bytes: 70 00 0B 00 00 00 00 0A 00 00 00 00 50 00 00 00
>> Sense Key: 0xB Aborted Command, Segment 0
>> Sense Code: 0x50 Qual 0x00 (write append error) Fru 0x0
>> Sense flags: BLK 0 (not valid)
>> cmd finished after 15.734s. timeout 120s
>> Trouble flushing the cache
>>
>>
>> My CD Writer is a RICOH MP-6200S with firmware 2.20 under cdrecord 1.6
>> and linux 2.1.11x. My PC is a Pentium-100 with 64 MB
>
> Is the CDR on your second SCSI adapter?
No, it is on the first SCSI adapter. The other SCSI adapter is a
Adaptec 152x which i only use for my scanner.
>
> I have the same drive (RICOH MP-6200S), and get a similar error if it is
> on the second controller. However my errors are based on which SCSI
> adapter the drive is on.
>
> I have 2 Buslogic controllers, and UltraWide for the 3 seagate cheetas in
> my workstation, and a Ultra (BT-958 and BT-948 respectivly) for running
> the CDR, CDROM, Jaz, Zip, and tape drive.
>
>
> With the CDR on adapter 0 it works perfectly, with it on
> controller 2 it detects file (with -inq), but after starting the burn it
> dies with very similar errors.
>
> I have swapped out controllers, changed IDs, tried 2.0.33 2.0.34
> 2.0.35, as well as many 2.1 serias kernels. Exect same thing every time.
>
--
Georg Funke
Crowns & Flames SDC Cologne, Germany; http://www.geocities.com/Colosseum/4893
"Friendship is Square Dancing's greatest Reward"
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.rutgers.edu
