[4202] in linux-scsi channel archive
Re: backup
daemon@ATHENA.MIT.EDU (Kai M{kisara)
Tue Jun 23 02:26:34 1998
Date: Tue, 23 Jun 1998 09:21:36 +0300 (EET DST)
From: Kai M{kisara <makisara@metla.fi>
Reply-To: Kai.Makisara@metla.fi
To: NOLAN@VENUS.TWU.EDU
cc: linux-scsi@vger.rutgers.edu
In-Reply-To: <01IYJJQ2R78K00DN5E@VENUS.TWU.EDU>
On Mon, 22 Jun 1998 NOLAN@VENUS.TWU.EDU wrote:
...
> Registered HBAs:
> HBA no. Boardtype Revis EATA Bus BaseIO IRQ DMA Ch ID Pr QS S/G IS
> scsi0 : PM2144UW v07L.1 2.0c PCI 0x9210 10 BMST 1 7 N 64 252 Y
> scsi0 : EATA (Extended Attachment) HBA driver
> scsi : 1 host.
> Vendor: DPT Model: RAID-5 Rev: 07L1
> Type: Direct-Access ANSI SCSI revision: 02
> Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
> Vendor: Quantum Model: DLT4000 Rev: CC37
> Type: Sequential-Access ANSI SCSI revision: 02
> scsi0: queue depth for target 0 on channel 0 set to 51
> scsi0: queue depth for target 4 on channel 0 set to 12
> scsi : detected 1 SCSI disk total.
You don't have the SCSI tape driver compiled into the kernel (or loaded as
a module). With the SCSI tape driver you should see:
scsi : detected 1 SCSI disk and 1 SCSI tape total.
Kai
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.rutgers.edu
