[3938] in linux-scsi channel archive
Re: more info about the 1520
daemon@ATHENA.MIT.EDU (Kristian Soerensen)
Sat May 16 12:13:08 1998
Date: Sat, 16 May 1998 18:15:50 +0200 (MET DST)
From: Kristian Soerensen <elof@image.dk>
To: Craig Raeburn <craeb@beeline.ca>
cc: linux-scsi@vger.rutgers.edu
In-Reply-To: <3.0.3.32.19980515183322.00b18360@pop.beeline.ca>
On Fri, 15 May 1998, Craig Raeburn wrote:
> more info on install problem with the 1520
>
> 1) Its a 1520B with the onboard Bios enabled
>
> 2) using address 340, IRQ of 11
>
> 3) have only scsi hard drives
> cdrom is ide - works ok
> Win95 is on first drive, Linux is on second
>
> Thanks for the replies - never thought about disabling the bios. Will give
> it a try.
You cannot boot from a disk on a controller whose BIOS is disabled.
I got some information from:
Markus Kossmann <markus.kossmann@inka.de>
You can apparently configure modules that will be loaded by kerneld by
writing their parameters and other info to /etc/conf.modules.
The whole process is described in a file in the Linux kernel source
usually to be found at /usr/src/linux/Documentation/modules.txt
--------------------------------------------------------------
The Linux Resource Exchange http://www.falconweb.com/~linuxrx
Kristian Elof Soerensen elof@image.dk 45 93 92 02
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.rutgers.edu
