[3494] in linux-scsi channel archive
Re: ST15230WC trouble
daemon@ATHENA.MIT.EDU (Jon Lewis)
Mon Mar 9 01:32:54 1998
Date: Mon, 9 Mar 1998 01:26:59 -0500 (EST)
From: Jon Lewis <jlewis@inorganic5.fdt.net>
To: Linux SCSI Mailing List <linux-scsi@vger.rutgers.edu>
cc: ncr53c810@Colorado.EDU
In-Reply-To: <Pine.LNX.3.95.980308212154.576J-100000@tarkin.fdt.net>
Here's the kernel ouput with 2.0.33 and ncr53c8xx driver 2.4a:
ncr53c8xx: at PCI bus 0, device 12, function 0
ncr53c8xx: 53c875J detected with Symbios NVRAM
ncr53c875J-0: rev=0x04, base=0xe4000000, io_port=0xb800, irq=5
ncr53c875J-0: Symbios format NVRAM, ID 7, Fast-20, Parity Checking
ncr53c875J-0: initial SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex)
05/46/80/00/00/24
ncr53c875J-0: final SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex)
05/8e/a0/01/08/24
ncr53c875J-0: on-board RAM at 0xe3800000
ncr53c875J-0: on-board ram mapped at virtual address 0x282f000
ncr53c875J-0: requesting shared irq 5 (dev_id=0x127c080)
ncr53c875J-0: resetting, command processing suspended for 2 seconds
ncr53c875J-0: restart (scsi reset).
ncr53c875J-0: enabling clock multiplier
ncr53c875J-0: copying script fragments into the on-board RAM ...
scsi1 : ncr53c8xx - revision 2.4a
scsi : 1 host.
ncr53c875J-0: command processing resumed
Vendor: SEAGATE Model: ST15230W SUN4.2G Rev: 0738
Type: Direct-Access ANSI SCSI revision: 02
When I try fdisk /dev/sda
sda: Spinning up disk...<6>ncr53c875J-0-<0,0>: FAST-10 SCSI 10.0 MB/s (100
ns, offset 15)
.............................................................................
.......................not responding...
sda : READ CAPACITY failed.
sda : status = 1, message = 00, host = 0, driver = 28
sda : extended sense code = 2
sda : block size assumed to be 512 bytes, disk size 1GB.
sda:SCSI disk error : host 1 channel 0 id 0 lun 0 return code = 28000002
extra data not valid Current error sd08:00: sense key Not Ready
Additional sense indicates Logical unit not ready, cause not reportable
scsidisk I/O error: dev 08:00, sector 0, absolute sector 0
unable to read partition table
SCSI disk error : host 1 channel 0 id 0 lun 0 return code = 28000002
extra data not valid Current error sd08:00: sense key Not Ready
Additional sense indicates Logical unit not ready, cause not reportable
scsidisk I/O error: dev 08:00, sector 0, absolute sector 0
------------------------------------------------------------------
Jon Lewis <jlewis@fdt.net> | Unsolicited commercial e-mail will
Network Administrator | be proof-read for $199/message.
Florida Digital Turnpike |
______http://inorganic5.fdt.net/~jlewis/pgp for PGP public key____
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.rutgers.edu
