[1989] in linux-scsi channel archive
Re: SCSI problem with ASUS SC-200
daemon@ATHENA.MIT.EDU (Danilo Rene Neuber)
Fri Jun 13 06:12:37 1997
Date: Fri, 13 Jun 1997 12:08:26 +0200 (MET DST)
From: Danilo Rene Neuber <daneuber@sbox.tu-graz.ac.at>
To: Thomas Tongue <ttongue@proteus.imagiware.com>
cc: linux-scsi@vger.rutgers.edu
In-Reply-To: <Pine.LNX.3.94.970606134818.24511I-100000@proteus.imagiware.com>
On Fri, 6 Jun 1997, Thomas Tongue wrote:
>
> I have a problem similar to others mentioned in this group. I am recieving
> on the console the following messages when trying to run a tape backup:
>
> scsi : aborting command due to timeout : pid 93469, scsi0, channel 0, id 2, lun 0 Write (6) 0d 00 5b 02 00
> scsi0 : DANGER : command running, can not abort.
> scsi : aborting command due to timeout : pid 93470, scsi0, channel 0, id 2, lun 0 Write (6) 0d 40 57 04 00
> scsi0 : found command 93470 in Linux issue queue
> scsi : aborting command due to timeout : pid 93471, scsi0, channel 0, id 2, lun 0 Write (6) 0d 40 5b 02 00
> scsi0 : found command 93471 in Linux issue queue
> scsi : aborting command due to timeout : pid 93466, scsi0, channel 0, id 0, lun 0 Write (6) 00 00 41 02 00
> scsi0 : DANGER : command running, can not abort.
> scsi : aborting command due to timeout : pid 93467, scsi0, channel 0, id 0, lun 0 Write (6) 00 00 49 02 00
> scsi0 : found command 93467 in Linux issue queue
> [...]
I also use an Asus SC200 NCR 810 card and I've had similar problems: When
booting the system, the ncr7,8xx would sometimes hang after trying to
abort some command - then I had to turn my
computer off and on again and try again...
Meanwhile I have switched to Gerard Roudier's ncr53c8xx driver (version
1.18d) and since then I've never encountered this problem again! (However I
still experience such hangs when booting Win95 with the standard driver.)
So you should at include version information of the scsi driver you're
using! If you didn't do it already, I would recommend upgrading to the
lastest ncr53c8xx release which can be found at:
ftp://linux.wauug.org/pub/people/gerard-roudier
Special thanks to Geraud for his excellent work on the ncr53c8xx driver!
Danilo Neuber alias daneuber@sbox.tu-graz.ac.at
