[1959] in linux-scsi channel archive
SCSI problem with ASUS SC-200
daemon@ATHENA.MIT.EDU (Thomas Tongue)
Fri Jun 6 15:18:45 1997
Date: Fri, 6 Jun 1997 14:06:05 -0500 (CDT)
From: Thomas Tongue <ttongue@proteus.imagiware.com>
Reply-To: Thomas Tongue <ttongue@proteus.imagiware.com>
To: linux-scsi@vger.rutgers.edu
I have a problem similar to others mentioned in this group. I am recieving
on the console the following messages when trying to run a tape backup:
scsi : aborting command due to timeout : pid 93469, scsi0, channel 0, id 2, lun 0 Write (6) 0d 00 5b 02 00
scsi0 : DANGER : command running, can not abort.
scsi : aborting command due to timeout : pid 93470, scsi0, channel 0, id 2, lun 0 Write (6) 0d 40 57 04 00
scsi0 : found command 93470 in Linux issue queue
scsi : aborting command due to timeout : pid 93471, scsi0, channel 0, id 2, lun 0 Write (6) 0d 40 5b 02 00
scsi0 : found command 93471 in Linux issue queue
scsi : aborting command due to timeout : pid 93466, scsi0, channel 0, id 0, lun 0 Write (6) 00 00 41 02 00
scsi0 : DANGER : command running, can not abort.
scsi : aborting command due to timeout : pid 93467, scsi0, channel 0, id 0, lun 0 Write (6) 00 00 49 02 00
scsi0 : found command 93467 in Linux issue queue
Note that this symptom does not crash the machine, and the tape backup
appears to work fine. The also does not appear to be any damage to the
disks (which are also SCSI).
Heres the config info:
Kernel: 2.0.30 (both with and without SMP enabled)
Hardware: Dual Pentium Pro MB by ASUS (with 2 PPro200's)
128 MB RAM
ASUS SC-200 SCSI adapter
3com 3c590 PCI ethernet
....
Other system info:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: QUANTUM Model: FIREBALL_TM1280S Rev: 300X
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 02 Lun: 00
Vendor: QUANTUM Model: FIREBALL_TM2110S Rev: 300X
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 03 Lun: 00
Vendor: QUANTUM Model: FIREBALL_TM2110S Rev: 300X
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 04 Lun: 00
Vendor: ARCHIVE Model: Python 25501-XXX Rev: 5.AC
Type: Sequential-Access ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 06 Lun: 00
Vendor: NEC Model: CD-ROM DRIVE:502 Rev: 2.2e
Type: CD-ROM ANSI SCSI revision: 01
As indicated above, this happens while the tape drive is running,
but the id's singled out by the error messages are for the hard
drives. Suggestions?
Thomas Tongue
ttongue@imagiware.com
http://imagiware.com/
