[1448] in linux-scsi channel archive
Re: aha151x support?
daemon@ATHENA.MIT.EDU (Risto Jouhki)
Thu Feb 20 09:03:13 1997
To: linux-scsi@vger.rutgers.edu
From: risto@vortex.is (Risto Jouhki)
Date: Thu, 20 Feb 1997 14:00:00 +0000
At 12:10 AM 2/20/97 -0500, you wrote:
>
>Hi all. Can someone tell me how to get the aha1510 working? I guess its
>the 6360 chipset.
>
>I understand it doesn't have a bios, and therefore can't be probed, but I
>can't get it to work with a module, or compiled directly in the kernel.
>
>As a matter of fact, ezscsi told me it was at 0x340, but I'm not sure what
>IRQ it is at, so I guess that could be part of the problem. Is there a
>utility to test IRQ's? I have tried all the 'reccommended' ones, though.
>
>I suppose I use the 152x driver, which I have read aha152x.c and
>Modules-HOWTO, to no avail.
>
>I also don't think I'm inserting the module right. 'insmod aha152x.o
>io=0x340 irq=11' complains for some reason, despite the fact that
>/etc/conf.modules has similiar command line args for my aha2940, which
>works just fine. (I have tried the 1510 in another system, without two
>scsi cards in it.)
>
>Could you please also copy me, as I think there is some problem with my
>mail system here. All of the sudden majordomo doesn't respond to me any
>longer :(
>
>Thanks much,
>Dave Wreski
>
>
Here is a quik one:
boot: linux aha152x=0x340,11,7,1
where 340 is address, 11 is interrupt, 7 is scsi-bus address, 1 is needed
but I don´t remember what it was. Worked with 0.1.57 kernel.
Use "append" in LILO.
Hope this helps.
Risto
Risto Jouhki Email: risto@vortex.is
Frostafold 20
IS-112 Reykjavík
ICELAND
