[2382] in Enterprise Print Delivery Team
VM Print Changes
daemon@ATHENA.MIT.EDU (Lynne E. Durland)
Fri Mar 8 18:03:33 2002
Message-Id: <5.0.2.1.2.20020308174401.03d2ca50@hesiod>
Date: Fri, 08 Mar 2002 18:06:08 -0500
To: fortoul@MIT.EDU
From: "Lynne E. Durland" <durland@MIT.EDU>
Cc: printdel@MIT.EDU
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"; format=flowed
Karen,
In a nutshell, what we would like to propose changing in the "standard"
print forms in VM is alter the oper forms that start HR to HL, with the
understanding that the operators would set the trays menu in the printer to
print this output through the duplex path.
This would also affect any, if they exist, XNNN forms that use holes paper
and are simplex.
These changes would only affect the operators, once made, so that all holes
printing on the IP60 printers would be done the same way, i.e. the paper
would be loaded the same way, and the menu in the printer would need to
updated, to prevent confusion, need for reprints, or worse clients
receiving output with the holes on the wrong side of the paper.
Also since there are two IP60 printers and the amount of simplex output
printed is 10% of the total printed, through the efforts of the clients to
switch to duplex output, this information is slightly old, but should still
be fairly accurate, the increase in print time is not a major factor.
The changes requested will be transparent to the end users who print
simplex, except that the holes will be on the correct side of the header
and trailer sheets.
Hope this helps.
Lynne
On behalf of the Enterprise Print Delivery Team
Lynne E. Durland
Information Systems
Database Services
W91-109
O: 617-258-5857
C: 617-293-8091
H: KB1FEM
"When one door of happiness closes, another opens; but often we look so
long at the closed door that we do not see the one which has been opened
for us."
--Helen Keller
