[20441] in Athena Bugs
Re: new installer failure on a cluster-model ibm
daemon@ATHENA.MIT.EDU (Arun A Tharuvai)
Mon Jul 1 00:55:05 2002
Date: Mon, 1 Jul 2002 00:55:02 -0400
From: Arun A Tharuvai <aatharuv@MIT.EDU>
To: bugs@mit.edu
Cc: arolfe@mit.edu, aatharuv@mit.edu
Message-ID: <20020701045502.GC1297@w20-spare-pokemon.mit.edu>
Mime-Version: 1.0
Content-Type: multipart/mixed; boundary="ZPt4rx8FFjLCG7dd"
Content-Disposition: inline
In-Reply-To: <200206281800.OAA07984@cutter-john.mit.edu>
--ZPt4rx8FFjLCG7dd
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
I tried installing the SIPB IBM again, ( with the noapic boot option,
that for some people, according to websearches, appeared to stop the
"eepro100: wait_for_cmd_done" problem.) That didn't work, and the
installer froze (and stopped responding to pings) about 20 seconds after
the machine displayed "installing rpms"
I then tried installing debian woody on the machine for the purpose of getting
some information on the ethernet card, to compare it with other IBM's
which have successfully installed. From the install cd itself, I ran
lspci -v, dmesg, and uname -a , and have attached the output below.
Arun A Tharuvai
>To: bugs@mit.edu
>From: Alex Rolfe <arolfe@MIT.EDU>
>Date: 28 Jun 2002 16:48:59 -0400
>In-Reply-To: <200206281800.OAA07984@cutter-john.mit.edu>
>Message-ID: <ubzelerm8n8.fsf@cutter-john.mit.edu>
>MIME-Version: 1.0
>Content-Type: text/plain; charset=us-ascii
>
>
>Further investigation reveals that the installer brings up the network
>correctly (I can ping the router from the shell). But at somepoint, the
>network card gets unhappy and starts spewing the message
>
> <1> eepro100: wait_for_cmd_done timeout
>
> on the alt-F4 console. At that point, I can't ping anything from the
> machine or ping the machine.
>
> Alex
On Fri, Jun 28, 2002 at 02:00:41PM -0400, Alex Rolfe wrote:
>
> SIPB received one of the new ibms today and I tried the installer from
> the bootkit locker on it.
>
> I've tried the default install (not a custom install and accepting all
> default settings) twice. In both cases, the machine freezes after it
> displays "installing rpms". The first time, the power button on the
> front of that machine worked. This time, it's not even responding to
> that. The LED on the network card is blinking rapidly and with constant
> period.
>
> I don't know if this is a bugs bug or a hotline bug, but any suggestions
> are welcome.
>
> Alex
--ZPt4rx8FFjLCG7dd
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename=lspci
00:00.0 Class 0600: 8086:1a30 (rev 03)
Flags: bus master, fast devsel, latency 0
Memory at f8000000 (32-bit, prefetchable) [size=64M]
Capabilities: [e4] #09 [0104]
Capabilities: [a0] AGP version 2.0
00:01.0 Class 0604: 8086:1a31 (rev 03)
Flags: bus master, 66Mhz, fast devsel, latency 96
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
Memory behind bridge: f4000000-f48fffff
Prefetchable memory behind bridge: f6000000-f7ffffff
00:1e.0 Class 0604: 8086:244e (rev 12)
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
I/O behind bridge: 00002000-00002fff
Memory behind bridge: f4900000-f49fffff
00:1f.0 Class 0601: 8086:2440 (rev 12)
Flags: bus master, medium devsel, latency 0
00:1f.1 Class 0101: 8086:244b (rev 12) (prog-if 80 [Master])
Subsystem: 1014:0234
Flags: bus master, medium devsel, latency 0
I/O ports at 1800 [size=16]
00:1f.2 Class 0c03: 8086:2442 (rev 12)
Subsystem: 1014:0234
Flags: bus master, medium devsel, latency 0, IRQ 19
I/O ports at 1820 [size=32]
00:1f.3 Class 0c05: 8086:2443 (rev 12)
Subsystem: 1014:0234
Flags: medium devsel, IRQ 17
I/O ports at 1810 [size=16]
00:1f.4 Class 0c03: 8086:2444 (rev 12)
Subsystem: 1014:0234
Flags: bus master, medium devsel, latency 0, IRQ 23
I/O ports at 1840 [size=32]
00:1f.5 Class 0401: 8086:2445 (rev 12)
Subsystem: 1014:0234
Flags: bus master, medium devsel, latency 0, IRQ 17
I/O ports at 1c00 [size=256]
I/O ports at 1880 [size=64]
01:00.0 Class 0300: 102b:0525 (rev 85)
Subsystem: 102b:23c3
Flags: medium devsel, IRQ 16
Memory at f6000000 (32-bit, prefetchable) [size=32M]
Memory at f4800000 (32-bit, non-prefetchable) [size=16K]
Memory at f4000000 (32-bit, non-prefetchable) [size=8M]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
Capabilities: [f0] AGP version 2.0
02:08.0 Class 0200: 8086:2449 (rev 03)
Subsystem: 1014:0234
Flags: bus master, medium devsel, latency 66, IRQ 20
Memory at f4900000 (32-bit, non-prefetchable) [size=4K]
I/O ports at 2000 [size=64]
Capabilities: [dc] Power Management version 2
--ZPt4rx8FFjLCG7dd
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename=uname
Linux .localdomain.fake 2.4.18-bf2.4 #1 Mon May 27 17:55:01 EDT 2002 i686 unknown
--ZPt4rx8FFjLCG7dd
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename=dmesg
Linux version 2.4.18-bf2.4 (root@steve-dallas) (gcc version 2.95.4 20011002 (Debian prerelease)) #1 Mon May 27 17:55:01 EDT 2002
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001feb0000 (usable)
BIOS-e820: 000000001feb0000 - 000000001fefc000 (ACPI data)
BIOS-e820: 000000001fefc000 - 000000001fefd000 (ACPI NVS)
BIOS-e820: 000000001fefd000 - 000000001ff00000 (reserved)
BIOS-e820: 000000001ff00000 - 000000001ff80000 (usable)
BIOS-e820: 000000001ff80000 - 0000000020000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
found SMP MP-table at 000f5f70
hm, page 000f5000 reserved twice.
hm, page 000f6000 reserved twice.
hm, page 0009f000 reserved twice.
hm, page 000a0000 reserved twice.
On node 0 totalpages: 130944
zone(0): 4096 pages.
zone(1): 126848 pages.
zone(2): 0 pages.
Intel MultiProcessor Specification v1.1
Virtual Wire compatibility mode.
OEM ID: Product ID: APIC at: 0xFEE00000
Processor #0 Unknown CPU [15:2] APIC version 20
I/O APIC #1 Version 32 at 0xFEC00000.
Processors: 1
Kernel command line: init=/sbin/stage0.sh initrd=initrd ramdisk_size=8192 root=/dev/ram0 rw BOOT_IMAGE=linux
Initializing CPU#0
Detected 1993.574 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 3971.48 BogoMIPS
Memory: 510844k/523776k available (1741k kernel code, 12224k reserved, 537k data, 260k init, 0k highmem)
Dentry-cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: Before vendor init, caps: 3febfbff 00000000 00000000, vendor = 0
CPU: L1 I cache: 12K, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: After vendor init, caps: 3febfbff 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 3febfbff 00000000 00000000 00000000
CPU: Common caps: 3febfbff 00000000 00000000 00000000
CPU: Intel(R) Pentium(R) 4 CPU 2.00GHz stepping 04
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
ENABLING IO-APIC IRQs
Setting 1 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 1 ... ok.
init IO_APIC IRQs
IO-APIC (apicid-pin) 1-0, 1-5, 1-10, 1-11, 1-18, 1-21, 1-22 not connected.
..TIMER: vector=0x31 pin1=2 pin2=0
number of MP IRQ sources: 20.
number of IO-APIC #1 registers: 24.
testing the IO APIC.......................
IO APIC #1......
.... register #00: 01008000
....... : physical APIC id: 01
WARNING: unexpected IO-APIC, please mail
to linux-smp@vger.kernel.org
.... register #01: 00178020
....... : max redirection entries: 0017
....... : PRQ implemented: 1
....... : IO APIC version: 0020
.... register #02: 00000000
....... : arbitration: 00
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 001 01 0 0 0 0 0 1 1 39
02 001 01 0 0 0 0 0 1 1 31
03 001 01 0 0 0 0 0 1 1 41
04 001 01 0 0 0 0 0 1 1 49
05 000 00 1 0 0 0 0 0 0 00
06 001 01 0 0 0 0 0 1 1 51
07 001 01 0 0 0 0 0 1 1 59
08 001 01 0 0 0 0 0 1 1 61
09 001 01 0 0 0 0 0 1 1 69
0a 000 00 1 0 0 0 0 0 0 00
0b 000 00 1 0 0 0 0 0 0 00
0c 001 01 0 0 0 0 0 1 1 71
0d 001 01 0 0 0 0 0 1 1 79
0e 001 01 0 0 0 0 0 1 1 81
0f 001 01 0 0 0 0 0 1 1 89
10 001 01 1 1 0 1 0 1 1 91
11 001 01 1 1 0 1 0 1 1 99
12 000 00 1 0 0 0 0 0 0 00
13 001 01 1 1 0 1 0 1 1 A1
14 001 01 1 1 0 1 0 1 1 A9
15 000 00 1 0 0 0 0 0 0 00
16 000 00 1 0 0 0 0 0 0 00
17 001 01 1 1 0 1 0 1 1 B1
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ17 -> 0:17
IRQ19 -> 0:19
IRQ20 -> 0:20
IRQ23 -> 0:23
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1993.5999 MHz.
..... host bus clock speed is 99.6800 MHz.
cpu: 0, clocks: 996800, slice: 498400
CPU0<T0:996800,T1:498400,D:0,S:498400,C:996800>
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfd933, last bus=2
PCI: Using configuration type 1
PCI: Probing PCI hardware
Unknown bridge resource 0: assuming transparent
Unknown bridge resource 2: assuming transparent
PCI: Using IRQ router PIIX [8086/2440] at 00:1f.0
PCI->APIC IRQ transform: (B0,I31,P3) -> 19
PCI->APIC IRQ transform: (B0,I31,P1) -> 17
PCI->APIC IRQ transform: (B0,I31,P2) -> 23
PCI->APIC IRQ transform: (B0,I31,P1) -> 17
PCI->APIC IRQ transform: (B1,I0,P0) -> 16
PCI->APIC IRQ transform: (B2,I8,P0) -> 20
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
IBM machine detected. Enabling interrupts during APM calls.
Starting kswapd
VFS: Diskquotas version dquot_6.4.0 initialized
Journalled Block Device driver loaded
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10e
block: 128 slots per queue, batch=32
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller on PCI bus 00 dev f9
PIIX4: chipset revision 18
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1800-0x1807, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x1808-0x180f, BIOS settings: hdc:DMA, hdd:pio
hda: MAXTOR 6L040J2, ATA DISK drive
hdc: CD-W524E, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 78177792 sectors (40027 MB) w/1819KiB Cache, CHS=4866/255/63
hdc: ATAPI 40X CD-ROM CD-R/RW drive, 1404kB Cache
Uniform CD-ROM driver Revision: 3.12
ide-floppy driver 0.97.sv
Partition check:
hda: hda1 hda2 < hda5 hda6 hda7 >
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
Loading I2O Core - (c) Copyright 1999 Red Hat Software
I2O configuration manager v 0.04.
(C) Copyright 1999 Red Hat Software
loop: loaded (max 8 devices)
Compaq CISS Driver (v 2.4.5)
HDLC support module revision 1.02 for Linux 2.4
Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994
Linux port (c) 1998 Building Number Three Ltd & Jan "Yenya" Kasprzak.
ide-floppy driver 0.97.sv
Promise Fasttrak(tm) Softwareraid driver 0.03beta: No raid array found
Highpoint HPT370 Softwareraid driver for linux version 0.01
No raid array found
SCSI subsystem driver Revision: 1.00
Red Hat/Adaptec aacraid driver, May 27 2002
DC390: 0 adapters found
3ware Storage Controller device driver for Linux v1.02.00.016.
3w-xxxx: No cards with valid units found.
request_module[scsi_hostadapter]: Root fs not mounted
request_module[scsi_hostadapter]: Root fs not mounted
i2o_scsi.c: Version 0.0.1
chain_pool: 0 bytes @ dfea6d40
(512 byte buffers X 4 can_queue X 0 i2o controllers)
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 32768)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 1169k freed
VFS: Mounted root (ext2 filesystem).
Freeing unused kernel memory: 260k freed
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others
eth0: OEM i82557/i82558 10/100 Ethernet, 00:02:55:FF:BA:9E, IRQ 20.
Board assembly 000000-000, Physical connectors present: RJ45
Primary interface chip i82555 PHY #1.
General self-test: passed.
Serial sub-system self-test: passed.
Internal registers self-test: passed.
ROM checksum self-test: passed (0x04f4518b).
mice: PS/2 mouse device common for all mice
VFS: Disk change detected on device ide1(22,0)
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
hda: unknown partition table
hda:
hda:
hda: hda1 < hda5 hda6 >
Adding Swap: 128480k swap-space (priority -1)
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
lp0: using parport0 (polling).
VFS: Disk change detected on device fd(2,0)
end_request: I/O error, dev 02:00 (floppy), sector 0
--ZPt4rx8FFjLCG7dd--
