[150584] in North American Network Operators' Group
Re: Provider WAAS service for multiple MPLS VPN customers, possible?
daemon@ATHENA.MIT.EDU (Jian Gu)
Mon Feb 27 20:39:38 2012
In-Reply-To: <CAJoqs+4EqqatCg4F6uRw1+vxWWnw-t0GusuZrxQBW8qPzFRqPg@mail.gmail.com>
Date: Mon, 27 Feb 2012 17:38:48 -0800
From: Jian Gu <guxiaojian@gmail.com>
To: Frank Ho <completearch@gmail.com>
Cc: nanog@nanog.org
Errors-To: nanog-bounces+nanog.discuss=bloom-picayune.mit.edu@nanog.org
Theoretically if both WAEs are placed inline on MPLS uplink, then it
should work -- unless WAAS code can only recognize IP/Ethernet but not
IP/MPLS/Ethernet traffic. I don't think WAAS is VRF aware and can
maintain a multi-VRF routing table.
On Mon, Feb 27, 2012 at 8:04 AM, Frank Ho <completearch@gmail.com> wrote:
> Hi there,
> =A0 =A0 Just want to know if anybody out there has tried to put a pair of
> Cisco WAAS cards on two PEs to optimize the traffic of multiple VRFs
> between them ? Is that actually possible ? If it's possible, how does
> the WAAS module card forward the optimized traffic back to the correct
> VRF? Any hints or sample configurations are most=A0appreciated.
>
>
> Frank.
>
