[836] in linux-scsi channel archive
Advansys ABP940 and linux 2.0.22
daemon@ATHENA.MIT.EDU (yuri mironoff)
Tue Oct 22 16:07:47 1996
Date: Tue, 22 Oct 1996 15:10:07 -0400 (EDT)
From: yuri mironoff <yuri@rgti.com>
To: bobf@advansys.com
Cc: linux-scsi@vger.rutgers.edu
Hello!
I've been trying a combination of ABP940, kernel v2.0.22 and driver v1.8
with no success. The driver fails to initialize (detect?) the board
properly. It finds the io port at 0xd700, Bios at 0 (?!?) but no devices
attached. The redhat3 boot disk I downloaded from the advansys FTP site
(kernel 1.2.13 & driver v1.3) sortof works - the driver detects the
board: io port at 0xd700, Bios at C000, and all the devices. However, this
combination issues an 'unknown warning 40' message and I get timeouts
across the SCSI bus unless I set the transfer speed to 5mb/s (or slower)
on the devices. Any ideas???
My system: Supermicro P6DOF (single processor), 64MB, Advansys ABP940,
Matrox Mystique, IBM 2.1 GB (DFMS), Quantum 540S,
Conner 3200 SCSI tape backup, NEC 501 x4 SCSI cdrom,
Intel Etherxpress 100B.
Thank you very much in advance,
Y.
