[7155] in linux-scsi channel archive
Re: Buslogic Trouble, ver 2.0.15
daemon@ATHENA.MIT.EDU (Hermann Lauer)
Mon Sep 6 04:18:59 1999
Date: Mon, 6 Sep 1999 10:18:51 +0200
From: Hermann Lauer <Hermann.Lauer@IWR.Uni-Heidelberg.De>
To: John Munoz <jmunoz1@uswest.net>
Cc: linux-scsi@vger.rutgers.edu
In-Reply-To: <37D305E2.1E9A6557@nospam.uswest.net>; from John Munoz on Sun, Sep 05, 1999 at 06:08:02PM -0600
Hello,
On Sun, Sep 05, 1999 at 06:08:02PM -0600, John Munoz wrote:
...
> I have same problem. I have repeatedly checked cabling, termination, term
> power, and everything else I could think of. I am planning on getting a ups
> in case it is power related. I'm using redhat 6.0, Amd k6-2 and bt952 (dual
FYI: My server is running with an ups, and I AFAIK, my Power is fine.
> channel, current revision).
>
> Here's all I know about it: It has a pci bridge on board, and uses the host
> cpu for command processing. My machine is also a server. I plan on trying
> a few combinations of pci mastering off / etc. So far i havent found
> anything... However, it now eventually recovers, just takes a while and no
> processing occurs during the reset...
How long does this take ? I have waited for approx. 5 minutes without
the machine comming back. Maybe it take longer for every disk, so
I have to wait with 9 disk's very long ?
Thanks for your reply.
Greetings
Hermann
--
Bildverarbeitungsgruppe des Interdiziplinaeren Zentrums fuer
wissenschaftliches Rechnen, Universitaet Heidelberg
INF 368; 69120 Heidelberg; Tel: (06221)54-8826, -6314 Fax: -8850
Email: Hermann.Lauer@iwr.uni-heidelberg.de
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.rutgers.edu
