[7025] in linux-scsi channel archive
Re: mt problem
daemon@ATHENA.MIT.EDU (Waseem Wahid)
Fri Aug 20 13:34:43 1999
To: linux-scsi@vger.rutgers.edu,
"Waseem Wahid" <waseem.wahid@mailcity.com>
Date: Fri, 20 Aug 1999 10:00:00 -0700
From: "Waseem Wahid" <waseem.wahid@mailcity.com>
I figured it out the problem. Here it is for everybody's information:
I was trying
mt -f /dev/nst0 setblk 512
and it didn't work. I made a symbolic link from /dev/tape --> /dev/nst0
ln -s /dev/nst0 /dev/tape
and then used
mt setblk 512
and it worked.
Now "mt status" shows the correct block size.
--
On Fri, 20 Aug 1999 09:01:38 Waseem Wahid wrote:
>I am trying to use the setblk option of mt to set the block size for a DDS-3 (12/24 GB) tape drive, but it doesn't seem to be taking effect. I want to set the block size to 512, but it always shows 0 when I do a status on it. I am running
>
>RedHat Linux (5.2) kernel 2.0.36
>mt version 0.5
>The machine is a Compaq Proliant 800 and it uses an NCR scsi controller.
>
>Any suggestions?
>
Get your FREE Email at http://mailcity.lycos.com
Get your PERSONALIZED START PAGE at http://my.lycos.com
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.rutgers.edu
