[6218] in linux-scsi channel archive
Re: new ncr/sym53c8xx driver tree at tux
daemon@ATHENA.MIT.EDU (Matthew Jacob)
Tue Mar 30 16:57:57 1999
Date: Tue, 30 Mar 1999 11:33:43 -0800 (PST)
From: Matthew Jacob <mjacob@feral.com>
Reply-To: mjacob@feral.com
To: Gerard Roudier <groudier@club-internet.fr>
cc: linux-scsi@vger.rutgers.edu, ncr53c810@colorado.edu
In-Reply-To: <Pine.LNX.3.95.990328133728.3090A-100000@localhost>
I went to the effort to snag this patch because I was having troubles with
a card.... no change...
Ultra30, 2.2.5-pre (sparc cvs repository)... your
patch patch-53c8xx-s01-d00-2.2.3.gz applied...
Card in question works absolutely fine in same configuration for Solaris 2.7.
Boot device: /pci@1f,4000/scsi@3/disk@3,0 File and args: test
SILO
Uncompressing image...
/
Booting Linux...
PROMLIB: Sun IEEE Boot Prom 3.9.5 1997/04/11 10:03
Linux version 2.2.5 (mjacob@slinx.feral.com) (gcc version egcs-2.92.11 19980921 (gcc2 ss-980609 experimental)) #7 Tue Mar 30 10:54:11 PST 1999
ARCH: SUN4U
Ethernet address: 08:00:20:82:62:f3
Calibrating delay loop... 591.46 BogoMIPS
Memory: 191536k available (1240k kernel code, 2888k data, 112k init) [fffff80000000000,fffff80023f32000]
POSIX conformance testing by UNIFIX
PCI: Probing for controllers.
PCI: Found PSYCHO version 0x3, main regs at fffff9fe00000000
PSYCHO: PCI config space at fffff9fe01000000
PCI: Probing PCI hardware
ebus0: fffff9fff0000000[1000000] fffff9fff1000000[800000]
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
Starting kswapd v 1.5
SAB82532 serial driver version 1.30
ttyS00 at 0xfffff9fff1400000 (irq = 12,7eb) is a SAB82532 V3.2
ttyS01 at 0xfffff9fff1400040 (irq = 12,7eb) is a SAB82532 V3.2
Console: ttyS0 (SAB82532)
pty: 256 Unix98 ptys configured
md driver 0.36.6 MAX_MD_DEV=4, MAX_REAL=8
ncr53c8xx: at PCI bus 0, device 3, function 0
ncr53c8xx: 53c875 detected
ncr53c8xx: at PCI bus 0, device 5, function 0
ncr53c8xx: 53c876 detected
ncr53c8xx: at PCI bus 0, device 5, function 1
ncr53c8xx: 53c876 detected
ncr53c875-0: rev=0x03, base=0x1ff80010000, io_port=0xfffff9fe02010400, irq=3,7e0
ncr53c875-0: NCR clock is 40218KHz, 40037KHz
ncr53c875-0: ID 7, Fast-20, Parity Checking
ncr53c875-0: on-chip RAM at 0x1ff80011000
ncr53c875-0: restart (scsi reset).
ncr53c875-0: Downloading SCSI SCRIPTS.
ncr53c876-1: rev=0x14, base=0x1ff80014000, io_port=0xfffff9fe02010c00, irq=6,7dc
ncr53c876-1: NCR clock is 40218KHz, 40037KHz
ncr53c876-1: ID 7, Fast-20, Parity Checking
ncr53c876-1: on-chip RAM at 0x1ff80015000
ncr53c876-1: restart (scsi reset).
ncr53c876-1: Downloading SCSI SCRIPTS.
ncr53c876-2: rev=0x14, base=0x1ff80016000, io_port=0xfffff9fe02011000, irq=6,7dc
ncr53c876-2: NCR clock is 40218KHz, 40037KHz
ncr53c876-2: ID 7, Fast-20, Parity Checking
ncr53c876-2: on-chip RAM at 0x1ff80017000
ncr53c876-2: restart (scsi reset).
ncr53c876-2: Downloading SCSI SCRIPTS.
scsi0 : ncr53c8xx - version 3.2
scsi1 : ncr53c8xx - version 3.2
scsi2 : ncr53c8xx - version 3.2
scsi : 3 hosts.
Vendor: IBM Model: DORS32160SUN2.1G Rev: WA7A
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
Vendor: IBM Model: DORS32160SUN2.1G Rev: WA4H
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sdb at scsi0, channel 0, id 1, lun 0
Vendor: SEAGATE Model: ST32550N Rev: 0022
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sdc at scsi0, channel 0, id 3, lun 0
ncr53c875-0-<0,0>: tagged command queue depth set to 4
ncr53c875-0-<1,0>: tagged command queue depth set to 4
ncr53c875-0-<3,0>: tagged command queue depth set to 4
scsi : aborting command due to timeout : pid 54, scsi2, channel 0, id 0, lun 0 Test Unit Ready 00 00 00 00 00
ncr53c8xx_abort: pid=54 serial_number=82 serial_number_at_timeout=82
(hangs here)
Solaris boot messages (excerpt):
mem = 195864K (0xbf46000)
avail mem = 177209344
Ethernet address = 8:0:20:82:62:f3
root nexus = Sun Ultra 30 UPA/PCI (UltraSPARC-II 296MHz)
pci108e,80000 at root: UPA 0x1f 0x4000
pci108e,80001 at root: UPA 0x1f 0x2000
glm0: Rev. 3 Symbios 53c875 found.
PCI-device: scsi@3, glm #0
glm0 is /pci@1f,4000/scsi@3
glm3: Rev. 4 Symbios 53c875 found.
PCI-device: scsi@5, glm #3
glm3 is /pci@1f,4000/scsi@5
glm4: Rev. 4 Symbios 53c875 found.
PCI-device: scsi@5,1, glm #4
glm4 is /pci@1f,4000/scsi@5,1
sd0 at glm0: target 0 lun 0
sd0 is /pci@1f,4000/scsi@3/sd@0,0
<SUN2.1G cyl 2733 alt 2 hd 19 sec 80>
sd1 at glm0: target 1 lun 0
sd1 is /pci@1f,4000/scsi@3/sd@1,0
<SUN2.1G cyl 2733 alt 2 hd 19 sec 80>
sd3 at glm0: target 3 lun 0
sd3 is /pci@1f,4000/scsi@3/sd@3,0
<Linux custom cyl 1007 alt 2 hd 67 sec 62>
sd779 at glm4: target 0 lun 0
sd779 is /pci@1f,4000/scsi@5,1/sd@0,0
WARNING: /pci@1f,4000/scsi@5,1/sd@0,0 (sd779):
corrupt label - wrong magic number
Vendor 'SEAGATE', product 'ST19171W', 17689267 512 byte blocks
sd780 at glm4: target 1 lun 0
sd780 is /pci@1f,4000/scsi@5,1/sd@1,0
WARNING: /pci@1f,4000/scsi@5,1/sd@1,0 (sd780):
corrupt label - wrong magic number
Vendor 'SEAGATE', product 'ST19171W', 17689267 512 byte blocks
sd781 at glm4: target 2 lun 0
sd781 is /pci@1f,4000/scsi@5,1/sd@2,0
<SUN9.0G cyl 4924 alt 2 hd 27 sec 133>
sd782 at glm4: target 3 lun 0
sd782 is /pci@1f,4000/scsi@5,1/sd@3,0
<SUN9.0G cyl 4924 alt 2 hd 27 sec 133>
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.rutgers.edu
