[5198] in linux-scsi channel archive
Re: AHA-1520x Timeouts [OctoChecked] [OctoChecked]
daemon@ATHENA.MIT.EDU (fochlerj@dupont-photomasks.de)
Mon Nov 23 08:04:35 1998
From: fochlerj@dupont-photomasks.de
To: linux-scsi@vger.rutgers.edu, livng1@iamerica.net
Date: Mon, 23 Nov 1998 13:12:02 +0200
Jörg Fochler@DPI
23.11.98 13:12
> aha152x: processing commandline: ok
> aha152x: BIOS test: passed, detected 1 controller(s)
> aha152x0: vital data: PORTBASE=0x340, IRQ=10, SCSI ID=7,
> reconnect=enabled, parity=enabled, synchronous=disabled, delay=100,
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
^^^^ This may be your problem. Iomega is famous for weaky
implementation of the SCSI protocol features (in SW & HW).
Simply try to use the SCSI support without disconnect/reconnect ability.
> aha152x: ignoring spurious interrupt, nothing to do
> QUEUE STATUS:
> issue_SC:
> current_SC:
> none
> disconnected_SC:
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ another hint to problems with disconnect/reconnect, because
it's the last command in the chain before spurious interrupt.
> When I attempt to mount a zip drive using the command "mount /dev/sda1
/mnt/zip"
> I receive the following errors : ^^^^^^^^^^^^^^^^^^^^
The usable partition is not always on xxx1,
may be xxx4 instead. Try to mount this
partition.
Hope this will help you
Joerg
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.rutgers.edu
