[4522] in linux-scsi channel archive
aha152x problem
daemon@ATHENA.MIT.EDU (Massimo Piccioni)
Mon Aug 10 04:47:25 1998
From: Massimo Piccioni <piccio@ermione.bo.astro.it>
To: linux-scsi@vger.rutgers.edu
Date: Mon, 10 Aug 1998 10:42:04 +0200 (CEST)
Cc: piccio@ermione.bo.astro.it (Massimo Piccioni)
Hi, all!
I'm having a problem with my adaptec aic-6360 and a Traxdata CD-recorder.
I changed my old Panasonic cr-503-b with a new Traxdata cdr4120 CD-recorder
and when I try to mount the CD (/dev/scd0, for reading) I receive this message:
Aug 3 17:10:42 eagle kernel: scsi : aborting command due to timeout : pid 1084, scsi0, channel 0, id 3, lun 0 Read (6) 00 00 10 01 00
Aug 3 17:10:50 eagle kernel: aha152x: abort(), SCpnt=0x0193ea04, QUEUE STATUS:
Aug 3 17:10:52 eagle kernel: issue_SC:
Aug 3 17:10:53 eagle kernel: current_SC:
Aug 3 17:11:00 eagle kernel: none
Aug 3 17:11:02 eagle kernel: disconnected_SC:
Aug 3 17:11:09 eagle kernel: 0x0193ea04: target=3; lun=0; cmnd=(Read (6) 00 00 10 01 00
Aug 3 17:11:10 eagle kernel: ); residual=1024; buffers=1; phase |disconnected|send_ident|; in other(MESSAGE IN); phaseend; next=0x00000000
Aug 3 17:11:12 eagle kernel:
Aug 3 17:11:19 eagle kernel: waiting: SCSISEQ (RESELI ); SCSISIG (DATA OUT); INTSTAT (lo); SSTAT (BUSFREE PHASECHG ); SSTAT (); SXFRCTL0 (CH1 ); SIGNAL (); SELID (c0), SSTAT2 (SEMPTY ); SFCNT (0); SCSICNT (0), OFFCNT(0), SSTAT4 (); DMACNTRL0 (16BIT PIO READ INTEN ); DMASTAT (DFIFOEMP )
Aug 3 17:11:20 eagle kernel: enabled interrupts (ENSELDI )
After that it seems that everything freezes (the kernel is busy, but still
working, don't know what is doing ;).
My current configuration is:
Aug 3 17:07:19 eagle kernel: aha152x: BIOS test: passed, detected 1 controller(s)
Aug 3 17:07:19 eagle kernel: aha152x0: vital data: PORTBASE=0x340, IRQ=12, SCSI ID=7, reconnect=enabled, parity=enabled, synchronous=disabled, delay=100, extended translation=disabled
Aug 3 17:07:19 eagle kernel: aha152x: trying software interrupt, ok.
Aug 3 17:07:19 eagle kernel: scsi0 : Adaptec 152x SCSI driver; $Revision: 1.18 $
Aug 3 17:07:19 eagle kernel: scsi : 1 host.
Aug 3 17:07:19 eagle kernel: Vendor: WANGTEK Model: 5150ES SCSI FA03 Rev: 08
Aug 3 17:07:19 eagle kernel: Type: Sequential-Access ANSI SCSI revision: 01
Aug 3 17:07:19 eagle kernel: Vendor: Traxdata Model: CDR4120 Rev: 5.0H
Aug 3 17:07:19 eagle kernel: Type: CD-ROM ANSI SCSI revision: 02
Aug 3 17:07:19 eagle kernel: Vendor: QUANTUM Model: FIREBALL ST4.3S Rev: 0F0C
Aug 3 17:07:19 eagle kernel: Type: Direct-Access ANSI SCSI revision: 02
The previous configuration was:
Jul 23 22:58:02 eagle kernel: aha152x: BIOS test: passed, detected 1 controller(s)
Jul 23 22:58:02 eagle kernel: aha152x0: vital data: PORTBASE=0x340, IRQ=12, SCSI ID=7, reconnect=enabled, parity=enabled, synchronous=disabled, delay=100, extended translation=disabled
Jul 23 22:58:02 eagle kernel: aha152x: trying software interrupt, ok.
Jul 23 22:58:02 eagle kernel: scsi0 : Adaptec 152x SCSI driver; $Revision: 1.18 $
Jul 23 22:58:02 eagle kernel: scsi : 1 host.
Jul 23 22:58:02 eagle kernel: Vendor: MATSHITA Model: CD-ROM CR-503 Rev: 1.0f
Jul 23 22:58:02 eagle kernel: Type: CD-ROM ANSI SCSI revision: 02
Jul 23 22:58:02 eagle kernel: Vendor: WANGTEK Model: 5150ES SCSI FA03 Rev: 08
Jul 23 22:58:02 eagle kernel: Type: Sequential-Access ANSI SCSI revision: 01
Jul 23 22:58:02 eagle kernel: Vendor: QUANTUM Model: FIREBALL ST4.3S Rev: 0F0C
Jul 23 22:58:02 eagle kernel: Type: Direct-Access ANSI SCSI revision: 02
Note that I haven't tried to write a CD yet.
Also that Windows95 works fine with it :.(
Any suggestion will be appreciated.
Thanks.
Massimo Piccioni
piccio@ermione.bo.astro.it
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.rutgers.edu
