[4347] in linux-scsi channel archive
Re: your mail
daemon@ATHENA.MIT.EDU (Robin Mecklenburgh)
Sat Jul 11 11:53:54 1998
Date: Sat, 11 Jul 1998 16:45:04 +0100 (BST)
From: Robin Mecklenburgh <Robin.Mecklenburgh@earth.ox.ac.uk>
To: Jeff Noxon <jeff@planetfall.com>
cc: Robin Mecklenburgh <Robin.Mecklenburgh@earth.ox.ac.uk>,
linux-scsi@vger.rutgers.edu
In-Reply-To: <19980709115942.A23361@planetfall.com>
Thanks for the help, it works now
On Thu, 9 Jul 1998, Jeff Noxon wrote:
> I haven't been able to use that board reliably on many systems.
>
> The default address should be detected though: IO 330, IRQ 11, DMA 5
>
> If you can't use those settings, you'll have to read the docs and tell
> Linux where to find the card.
>
> Jeff
>
> On Thu, Jul 09, 1998 at 05:54:02PM +0100, Robin Mecklenburgh wrote:
> > Is it possible to get an AHA1540CF adaptec scsi board to work with linux?
> > I am running 2.0.30 kernel (redhat).
> >
> > I looked in the redhat 5.1 documentation and the exact model was not
> > listed.
> >
> > When I try to install the card it doesn't detect the device. The standard
> > card settings that I am using are irq=12, dma=7,id=7 these can be changed
> > in the cards BIOS.
>
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.rutgers.edu
