[4220] in linux-scsi channel archive
Re: Adaptec 2940 booting problems
daemon@ATHENA.MIT.EDU (Henrik Johansson)
Thu Jun 25 10:45:09 1998
Date: Thu, 25 Jun 1998 16:21:35 -0100
From: Henrik Johansson <henrik@lcdata.se>
To: Marnik Joosten <mjoosten@connect.be>
CC: linux-scsi@vger.rutgers.edu
Mabye that is the best course of action, although itīs quite unusual
that Adaptec scsi-controllers (of any model) fail to work with the
proper driver intergrated into the kernel. If it is possible, You could
consult Your vendor; he/she might have another Adaptec 2940 You
could borrow just to see if the same problem occurs.
In either case there are other host-adapters that should work
fine: NCR/Asus with the buslogic chipset is not a bad choice as theyīre
cheap too.
Happy Hacking!
// Henrik
Marnik Joosten wrote:
> At 12:44 25/06/98 -0100, you wrote:
> >Hi!
> >
> >Sorry to barge in on something I havenīt been following, Iīd just want
> >to help out by assuring that Your Chipset revision is not too old;
> >Iīve used the 7860 rev. myself and got it running without any fuzz.
> >
> >Good Luck!
> >
> >// Henrik
> >
> >
> I'll just kick it out of my computer. (Although it was a little expensive
> :-() I think I just buy me a controller from another brand. Meanwhile I'll
> use an IDE cd-rom.
>
> But thanks,
> CU
> Marnik
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.rutgers.edu
