[3874] in linux-scsi channel archive
Re: fujitsu drives and aic7xxx
daemon@ATHENA.MIT.EDU (Zlatko Calusic)
Fri May 8 15:46:51 1998
To: David Hamm <dhamm@itserve.com>
Cc: Linux Scsi <linux-scsi@vger.rutgers.edu>
Reply-To: Zlatko.Calusic@CARNet.hr
From: Zlatko Calusic <Zlatko.Calusic@CARNet.hr>
Date: 08 May 1998 21:42:22 +0200
In-Reply-To: David Hamm's message of "Fri, 08 May 1998 12:19:16 -0400 (EDT)"
David Hamm <dhamm@itserve.com> writes:
> Having problems with aic7xxx controler and fujitsu drives. I seem to get
> parity errors. I've put the drives on an NT box with a symbios card and have
> no problems. I also have another server using the aic7xxx chip with a fujitsu
> drive and it works find. The only difference I can see is the model number of
> the drives. The one that works is M2954Q and the other is a M2954E. I've had
> a problem before with the M2954E as the system drive on the same computer so I
> had the mother boards swaped and ultimatly had go to a quantum drive to get
> the system up. The error I got when I tried to install redhat on this drive
> is below. And yes I have used two different M2954Es.
>
> Kernel Panic: aic7xxx: Waiting list inconsistancy; scb index=255 numscbs=0
>
>
FWIW, M2954ESP works flawlessly on my setup:
Adaptec 2940UW (aic7xxx)
Linux v2.1.100
P166MMX, 64MB RAM
Regards,
--
Posted by Zlatko Calusic E-mail: <Zlatko.Calusic@CARNet.hr>
---------------------------------------------------------------------
One way to stop a run away horse is to bet on him.
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.rutgers.edu
