[3150] in linux-scsi channel archive
SCSI CD-Rom Installation
daemon@ATHENA.MIT.EDU (Bob Kruger)
Fri Jan 30 08:47:52 1998
Date: Fri, 30 Jan 1998 07:43:27 -0600
To: linux-scsi@vger.rutgers.edu
From: Bob Kruger <bkruger@mindspring.com>
In trying to add a NEC 4X CD-ROM changer to a Linux server, I installed an
Adaptec 2941 PCI SCSI card. I recompiled the kernel with what I believe
are the appropriate options, and at boot up the server is showing the
following:
aic7xxx: <Adaptec AHA-294X Ultra SCSI host adapter> at PCI 20
aic7xxx: Warning - detected auto-termination. Please verify driver
detected settings and use manual termination if necessary.
aic7xxx: BIOS enabled, IO Port 0x6000, IO Mem 0xe0810000, IRQ 10, Revision B
aic7xxx: Single Channel, SCSI ID 7, 16/16 SCBs, QFull 16, QMask 0x1f
scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 4.1.1/3.2.1
scsi1 : SCSI host adapter emulation for IDE ATAPI devices
scsi : 2 hosts.
scsi0: Scanning channel A for devices.
Vendor: NRC Model: MBR-7.4 Rev: 101
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr0 at scsi0, channel 0, id 1, lun 0
Vendor: NRC Model: MBR-7.4 Rev: 101
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr1 at scsi0, channel 0, id 1, lun 1
Vendor: NRC Model: MBR-7.4 Rev: 101
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr2 at scsi0, channel 0, id 1, lun 2
Vendor: NRC Model: MBR-7.4 Rev: 101
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr3 at scsi0, channel 0, id 1, lun 3
Vendor: NRC Model: MBR-7.4 Rev: 101
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr2 at scsi0, channel 0, id 1, lun 2
Vendor: NRC Model: MBR-7.4 Rev: 101
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr3 at scsi0, channel 0, id 1, lun 3
Vendor: NRC Model: MBR-7.4 Rev: 101
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr4 at scsi0, channel 0, id 1, lun 4
Vendor: NRC Model: MBR-7.4 Rev: 101
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr5 at scsi0, channel 0, id 1, lun 5
Vendor: NRC Model: MBR-7.4 Rev: 101
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr6 at scsi0, channel 0, id 1, lun 6
scsi : detected 7 SCSI cdroms total.
In checking the /dev directory, I found that the server does not have any
devices sr0 to sr6. I believe that to be the next step in being able to
mount these CD-ROMs.
If anyone could give me some assistance to correctly create the devices, I
would greatly appreciate the help.
Thanks in advance.
Regards - Bob Kruger
