[2599] in linux-scsi channel archive
AHA2940 and CDR102
daemon@ATHENA.MIT.EDU (Marek Necas)
Tue Oct 7 04:32:31 1997
From: Marek Necas <man@chemi.muni.cz>
To: linux-scsi@vger.rutgers.edu (scsi)
Date: Tue, 7 Oct 1997 10:43:58 +0200 (MET DST)
Hello,
I've kernel 2.0.30 and YAMAHA CDR102 connected to AHA2940. Using cdwrite
I can write (in dummy mode) 55MB only, after that I get a lot of SENSE_ERRORs
scrolling down the screen. The same problem occured using cdrecord 1.5 (but
it's reported CDR102 works). I'm sending the verbose output of cdrecord:
Cdrecord release 1.5 Copyright (C) 1995-1997 Jörg Schilling
scsidev: '2,0'
scsibus: 0 target: 2 lun: 0
Executing 'test unit ready' command on Bus 0 Target 2, Lun 0 timeout 20s
CDB: 00 00 00 00 00 00
Executing 'test unit ready' command on Bus 0 Target 2, Lun 0 timeout 20s
CDB: 00 00 00 00 00 00
Executing 'inquiry' command on Bus 0 Target 2, Lun 0 timeout 20s
CDB: 12 00 00 00 24 00
Inquiry Data : 04 80 02 02 27 00 00 00 59 41 4D 41 48 41 20 20 43 44 52 31 30 32 20 20 20 20 20 20 20 20 20 20 31 2E 30 30
Device type : Removable WORM
Version : 2
Response Format: 2
Capabilities :
Vendor_info : 'YAMAHA '
Identifikation : 'CDR102 '
Revision : '1.00'
Device seems to be: Yamaha CDR-100.
Using driver for Yamaha CDR-100 / CDR-102 (yamaha_cdr100).
Driver flags : SWABAUDIO
Executing 'write_g0' command on Bus 0 Target 2, Lun 0 timeout 20s
CDB: 0A 00 00 00 10 00
... etc.......
Executing 'write_g0' command on Bus 0 Target 2, Lun 0 timeout 20s
CDB: 0A 00 00 00 10 00
Executing 'write_g0' command on Bus 0 Target 2, Lun 0 timeout 20s
CDB: 0A 00 00 00 10 00
Sense Bytes: 70 00 04 00 00 00 00 0A 00 00 00 00 09 00 00 00
Sense Key: 0x4 Hardware Error, Segment 0
Sense Code: 0x09 Qual 0x00 (track following error) Fru 0x0
Sense flags: Blk 0 (not valid)
write track data: error after 56721408 bytes
Executing 'request_sense' command on Bus 0 Target 2, Lun 0 timeout 20s
CDB: 03 00 00 00 12 00
Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00
Executing 'flush cache' command on Bus 0 Target 2, Lun 0 timeout 120s
CDB: 35 00 00 00 00 00 00 00 00 00
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 2C 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x2C Qual 0x00 (command sequence error) Fru 0x0
Sense flags: Blk 0 (not valid)
Executing 'fixation' command on Bus 0 Target 2, Lun 0 timeout 480s
CDB: E9 00 00 00 00 00 00 00 01 00
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 B1 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0xB1 Qual 0x00 (current program area empty) Fru 0x0
Sense flags: Blk 0 (not valid)
Executing 'prevent/allow medium removal' command on Bus 0 Target 2, Lun 0 timeout 20s
CDB: 1E 00 00 00 00 00
Any idea in solving this problem ? Thanks for help or any comments,
Marek Necas.
