[256] in linux-scsi channel archive

home help back first fref pref prev next nref lref last post

Adaptec AHA2940 SCSI PCI

daemon@ATHENA.MIT.EDU (Ramon Plaza Villegas)
Fri Jun 16 18:24:28 1995

Date: Fri, 16 Jun 1995 15:29:01 -0600 (CST)
From: Ramon Plaza Villegas <ramon@colmex.mx>
To: linux-scsi@vger.rutgers.edu
Cc: Patrick Vielle <patvie@DRACO.Rutgers.EDU>,
        Mauricio Plaza <mok@roxanne.nuclecu.unam.mx>




	Does anybody know if the Adaptec AHA2940 SCSI PCI is well supported?

	We have the following:
	
	-  Digital XL/Server 590 (100mhz/32Mb RAM)
	-  Internal motherboard PCI SCSI (AIC-7870 Chip)
		- HD SCSI 1Gb
		- HD SCSI 1Gb
		- CDROM
	-  Slot One PCI SCSI (AHA-2940)
	-  Two IDE HD 340Mb each
	-  EtherLink 3COM 579 EISA


		It seems that the SCSI hosts simply cannot  be
recognized, this is the whole boot log. Please do not post the answer,
email to: 
              admin@colmex.mx


........................................................................
Adaptec AIC-7870 BIOS v1.00.01
(c) 1994 Adaptec, Inc. All Rights Reserved.

 Press <Ctrl><A> for SCSISelect(TM) Utility!

 SCSI ID #0 - DEC      RZ26L  (c) DEC - Drive 82h
 SCSI ID #1 - DEC      RZ26L  (c) DEC - Drive 83h
 SCSI ID #6 - TOSHIBA  CD-ROM XM-4101TA

BIOS Installed Successfully!


Adaptec AHA-2940 BIOS v1.11
(c) 1994 Adaptec, Inc. All Rights Reserved.

 Press <Ctrl><A> for SCSISelect(TM) Utility!

SCSI ID #4 - EXABYTE  EXB-8500SMBANXH1

BIOS not installed!



BIOS and Video ROMs Shadowed
Primary and 256KB Secondary Cache Enabled

LILO Loading generic......
Uncompressing Linux...done.
Now booting the kernel
Console: colour EGA+ 80x25, 1 virtual console (max 63)
bios32_init : BIOS32 Service Directory structure at 0x000f8c20
bios32_init : BIOS32 Service Directory entry at 0xf0000
pcibios_init : PCI BIOS revision 2.00 entry at 0xf0100
Probing PCI hardware.
Calibrating delay loop.. ok - 36.08 BogoMips
Serial driver version 4.11 with no serial options enabled
tty00 at 0x03f8 (irq = 4) is a 16550A
tty01 at 0x02f8 (irq = 3) is a 16550A
lp1 at 0x0378, using polling driver
PS/2 auxiliary pointing device detected -- driver installed.
hda: QUANTUM LPS340A, 325MB w/98KB Cache, CHS=1011/15/44, MaxMult=8
hdb: QUANTUM LPS340A, 325MB w/98KB Cache, CHS=1011/15/44, MaxMult=8
ide0: primary interface on irq 14
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
scsi : 0 hosts.
scsi : detected total.
Memory: 31404k/32768k available (716k kernel code, 384k reserved, 264k data)
This processor honours the WP bit even when in supervisor mode. Good.
Swansea University Computer Society NET3.019
Swansea University Computer Society TCP/IP for NET3.019
IP Protocols: IGMP, ICMP, UDP, TCP
PPP: version 0.2.7 (4 channels) NEW_TTY_DRIVERS OPTIMIZE_FLAGS
TCP compression code copyright 1989 Regents of the University of California
PPP line discipline registered.
SLIP: version 0.8.3-NET3.019-NEWTTY (4 channels) (6 bit encapsulation 
enabled)
CSLIP: code copyright 1989 Regents of the University of California
eth0: 3c509 at 0x1000 tag 0, 10baseT port, address  00 20 af 1d 87 a5, 
IRQ 5.
3c509.c:1.03 10/8/94 becker@cesdis.gsfc.nasa.gov
Checking 386/387 coupling... Hmm, FDIV bug i586 system
Checking 'hlt' instruction... Ok.
Linux version 1.2.8 (root@neptuno) (gcc version 2.6.3) #2 Wed Jun 14 
02:04:15 CST 1995
Partition check:
  hda: hda1 hda2 hda3 hda4
  hdb: hdb1
VFS: Mounted root (ext2 filesystem) readonly.
Jun 15 18:56:14 init[1]: version 2.4 booting
/etc/rc.d/rc.S: Testing filesystem status: Read-only file system
Parallelizing fsck version 0.5b (14-Feb-95)
/dev/hda1 is clean, no check.
/dev/hdb1 is clean, no check.
/dev/hda4 is clean, no check.
/dev/hda3 is clean, no check.
Remounting root device with read-write enabled.
/dev/hda3 on /var type ext2 (rw)
/dev/hda4 on /tmp type ext2 (rw)
/dev/hdb1 on /usr type ext2 (rw)
mount: /dev/scd0 is not a block device
none on /proc type proc (rw)
Jun 16 00:56:23 init[1]: Entering runlevel: 5
Going multiuser...
eth0: Setting Rx mode to 1 addresses.
Mounting remote file systems...
Starting daemons: syslogd klogd portmap inetd lpd mountd nfsd
Starting sendmail daemon (/usr/sbin/sendmail -bd -q 15m)...
Loading /usr/lib/kbd/keytables/es.map
Checking for a CD... no CD found.
Running gpm...

---
	In advance...thanks!



home help back first fref pref prev next nref lref last post