[2502] in linux-scsi channel archive
cdrecord, Yamaha 400t, pre9, 2940uw ...
daemon@ATHENA.MIT.EDU (Hauke Johannknecht)
Sun Sep 21 16:48:19 1997
Date: Sun, 21 Sep 1997 22:42:37 +0200 (MET DST)
From: Hauke Johannknecht <ash@ash.ccc.de>
Reply-To: Hauke Johannknecht <ash@ash.ccc.de>
To: Linux SCSI-Mailingliste <linux-scsi@vger.rutgers.edu>,
Joerg Schilling <joerg@schily.isdn.cs.tu-berlin.de>
Hi.
Yeah, me again ... :)
this time i got a prob with my new cdwriter.
its a Yamaha 400t. controller is a 2940uw, hdd ibm dcrs.
when i try to "cdrecord" a cd it works perfectly
as long as i just use dummy mode. if i try to use
"burn"-mode then it crashes. allways !
(aehm, a 100MB-session sis work in real-mode to.)
the crash is NOT related to sysload i guess.
also happens if i burn with double or single speed.
(and i used to write cds with a HP-6020i in double
while doing a kernel-kompile on the same system. no probs.)
and it allways happens at around 500 of 600 MB.
i dont know if it is a prob of "cdrecord" or of the
scsi-part of the kernel. btw, kernel is pre-9 with
the fink buffer patches and even tried the "new"
2940-driver (abort-sep05). even tried with aic7xxx=no_reset.
output of cdrecord and syslog follows.
need more dumps ? just ask me...
In search for help,
Gruss,
Hauke
--
Hauke Johannknecht 5johannk@informatik.uni-hamburg.de
-> Hamburg / Germany <- - tschechow@geocities.com
http://www.geocities.com/TimesSquare/Arcade/9242/ ash@ash.ccc.de
--> pgp-key via public-key-server and on request <--> use pgp ! <--
--------8<---------
Cdrecord release 1.5 Copyright (C) 1995-1997 Jörg Schilling
TOC Type: 1 = CD-ROM
scsidev: '0,6,0'
scsibus: 0 target: 6 lun: 0
Device type : Removable CD-ROM
Version : 2
Response Format: 2
Capabilities :
Vendor_info : 'YAMAHA '
Identifikation : 'CDR400t '
Revision : '1.0g'
Device seems to be: Yamaha CDR-400.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : SWABAUDIO
Track 01: data 599 Mb pad
Total size: 689 Mb (68:16.94) = 307271 sectors
track info: 00 1A 01 01 00 00 4F 01 00 00 00 00 00 00 00 00 00 05 17 B4 00 00 00 00 00 05 17 B4
Set Starting to write CD at speed 4 in write mode for single session.
Last chance to quit, starting real write in n seconds.
Set Set track info: 00 1A 01 01 00 00 4F 01 00 00 00 00 00 00 00 00 00 05 17 B4 00 00 00 00 00 05 17 B4
Starting new track at sector: 0
Track 01: nnn of nnn Mb written.
status: 0x2 (CHECK CONDITION)
cdrecord: Unknown error. close session: scsi sendcmd: retryable error
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 04 D3 C0 00 00 0A 00 00 00 00 09 00 00 00
Sense Key: 0x4 Hardware Error, Segment 0
Sense Code: 0x09 Qual 0x00 (track following error) Fru 0x0
Sense flags: Blk -742391808 (not valid)
write track data: error after 608927744 bytes
Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00
Writing time: 1003.651s
Fixating...
Sense Bytes: 70 00 04 00 00 00 00 0A 00 00 00 00 09 00 00 00
Sense Key: 0x4 Hardware Error, Segment 0
Sense Code: 0x09 Qual 0x00 (track following error) Fru 0x0
Sense flags: Blk 0 (not valid)
Fixating time: 39.177s
-----------8<---------
Sep 20 10:45:34 speed modprobe: Can't locate module block-major-22
Sep 20 10:45:35 speed last message repeated 3 times
Sep 20 10:45:39 speed kernel: scsi0 channel 0 : resetting for second half of retries.
Sep 20 10:45:39 speed kernel: SCSI bus is being reset for host 0 channel 0.
Sep 20 10:45:39 speed kernel: (scsi0:-1:0) Reset device, active_scb 1
Sep 20 10:45:39 speed kernel: scsi0: Resetting current channel A
Sep 20 10:45:39 speed kernel: scsi0: Channel reset, sequencer restarted
Sep 20 10:45:42 speed kernel: Device not ready. Make sure there is a disc in the drive.
Sep 20 10:45:42 speed last message repeated 5 times
Sep 20 10:45:42 speed kernel: CD-ROM I/O error: dev 0b:01, sector 64
Sep 20 10:45:42 speed kernel: isofs_read_super: bread failed, dev 0b:01 iso_blknum 16 block 32
Sep 20 10:45:42 speed kernel: Device not ready. Make sure there is a disc in the drive.
Sep 20 10:45:42 speed last message repeated 3 times
-----------8<--------
