[2451] in linux-scsi channel archive
Pro Audio Spectrum
daemon@ATHENA.MIT.EDU (Artur Kedzierski)
Sat Sep 13 04:47:05 1997
Date: Thu, 11 Sep 1997 07:13:30 -0700 (PDT)
From: Artur Kedzierski <artur@cs.ucr.edu>
Reply-To: Artur Kedzierski <artur@cs.ucr.edu>
To: linux-music@vger.rutgers.edu, linux-scsi@vger.rutgers.edu
In-Reply-To: <199709110036.KAA31426@archenland.interweft.com.au>
Hi,
I have a Pro AudioSpectrum 16 rev 0 Sound card with a SCSI
controller. The card uses the IRQ for SCSI adapter and sound and I am not
sure how to fix it. The dmesg says the following:
pas16: WARNING: Can't use same irq as sound driver -- interrupts disabled
scsi0 : interrupts not enabled. for better interactive performance,
scsi0 : please jumper the board for a free IRQ.
scsi0 : at 0x0388 interrupts disabled options CAN_QUEUE=32 CMD_PER_LUN=2
releas
e=3 generic options AUTOPROBE_IRQ AUTOSENSE PSEUDO DMA UNSAFE generic
release=7
I read the Howto-sound and scsi, but all it says about the problem is to
give different IRQ to the two devices. However, there seem to be only on
jumper group for the IRQ on the board.
Can someone tell me how to fix it or where to find the
documenation for it? I checked the Media Vision page (they don't support
this card any more) and the devices manuals (it says to use a DOS based
program to fix). How do I fix it?
===================================================================
Artur Kedzierski, CS Major at University California, Riverside
Artur@cs.ucr.edu
