[2415] in linux-scsi channel archive
ncr53c8xx error messages (long).
daemon@ATHENA.MIT.EDU (Keith Owens)
Fri Sep 5 09:52:29 1997
From: Keith Owens <kaos@ocs.com.au>
To: linux-scsi@vger.rutgers.edu
Date: Fri, 05 Sep 1997 11:15:27 +1000
Dual ASUS P166, ASUS SC875 + Adaptec 1542C. Linux 2.1.51.
scsi/hosts.c patched to look for ncr53c8xx before Adaptec. The 1542 is
only present to handle an external box, currently powered down. The
system has been working fine for several weeks, then within 20 minutes
I got two sets of error messages.
This is the third Micropolis 3243, the previous two died. This
replacement is the version with the special electronics, rumour has it
that this version was created especially to replace dead 3243's.
Boot messages :-
ncr53c8xx: at PCI bus 0, device 11, function 0
ncr53c8xx: 53c875 detected
ncr53c875-0: rev=0x03, base=0xfb000000, io_port=0xe000, irq=12
ncr53c875-0: ID 7, Fast-20, Parity Checking
ncr53c875-0: on-board RAM at 0xfa800000
ncr53c875-0: restart (scsi reset).
ncr53c875-0: copying script fragments into the on-board RAM ...
Configuring Adaptec (SCSI-ID 7) at IO:330, IRQ 10, DMA priority 6
scsi0 : ncr53c8xx - revision 2.4
scsi1 : Adaptec 1542
scsi : 2 hosts.
ncr53c875-0-<0,0>: using tagged command queueing, up to 4 cmds/lun
Vendor: IBM Model: DORS-32160 Rev: WA6A
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
ncr53c875-0-<2,0>: using tagged command queueing, up to 4 cmds/lun
Vendor: MICROP Model: 3243NT Rev: x43h
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sdb at scsi0, channel 0, id 2, lun 0
Vendor: PHILIPS Model: CDD2600 Rev: 1.07
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr0 at scsi0, channel 0, id 3, lun 0
scsi : detected 1 SCSI cdrom 2 SCSI disks total.
ncr53c875-0-<0,0>: FAST-20 SCSI 20.0 MB/s (50 ns, offset 15)
SCSI device sda: hdwr sector= 512 bytes. Sectors= 4226725 [2063 MB] [2.1 GB]
ncr53c875-0-<2,0>: FAST-10 SCSI 10.0 MB/s (100 ns, offset 15)
SCSI device sdb: hdwr sector= 512 bytes. Sectors= 8388315 [4095 MB] [4.1 GB]
Error messages.
10:34
ncr53c875-0-<2,0>: phase change 2-3 10@0000eca0 resid=9.
scsi : aborting command due to timeout : pid 105389, scsi0, channel 0, id 2, lun 0 Write (10) 00 00 43 1c c2 00 00 02 00
ncr53c8xx_abort: pid=105389 serial_number=105409 serial_number_at_timeout=105409
scsi : aborting command due to timeout : pid 105390, scsi0, channel 0, id 0, lun 0 Write (6) 0a b2 a8 02 00
ncr53c8xx_abort: pid=105390 serial_number=105410 serial_number_at_timeout=105410
ncr53c875-0: abort ccb=c02fc020 (skip)
SCSI host 0 abort (pid 105390) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
ncr53c8xx_reset: pid=105390 reset_flags=2 serial_number=105410 serial_number_at_timeout=105410
ncr53c875-0: restart (scsi reset).
ncr53c875-0: copying script fragments into the on-board RAM ...
ncr53c875-0-<0,0>: FAST-20 SCSI 20.0 MB/s (50 ns, offset 15)
ncr53c875-0-<2,0>: FAST-10 SCSI 10.0 MB/s (100 ns, offset 15)
11:02
scsi : aborting command due to timeout : pid 107198, scsi0, channel 0, id 2, lun 0 Read (10) 00 00 2f 62 fe 00 00 04 00
ncr53c8xx_abort: pid=107198 serial_number=107222 serial_number_at_timeout=107222
scsi : aborting command due to timeout : pid 107199, scsi0, channel 0, id 2, lun 0 Read (10) 00 00 34 9c b8 00 00 02 00
ncr53c8xx_abort: pid=107199 serial_number=107223 serial_number_at_timeout=107223
ncr53c875-0: abort ccb=c02fc820 (skip)
SCSI host 0 abort (pid 107199) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
ncr53c8xx_reset: pid=107199 reset_flags=2 serial_number=107223 serial_number_at_timeout=107223
ncr53c875-0: restart (scsi reset).
ncr53c875-0: copying script fragments into the on-board RAM ...
ncr53c875-0-<0,0>: FAST-20 SCSI 20.0 MB/s (50 ns, offset 15)
ncr53c875-0-<2,0>: FAST-10 SCSI 10.0 MB/s (100 ns, offset 15)
