[1966] in linux-scsi channel archive
Re: Docs for an old Wangtek
daemon@ATHENA.MIT.EDU (Thomas Woinke)
Mon Jun 9 02:39:10 1997
Date: Mon, 09 Jun 1997 08:13:07 +0100
From: woinke@schieder.de (Thomas Woinke)
Reply-To: woinke@schieder.de
To: Robert_A._Kiesling@macline.com
CC: linux-scsi@vger.rutgers.edu
Hi,
This does not seem to be a SCSI Streamer.
Check out the tape drive device, is it
a Wangtek 5150 or similar? And it has a 50 pin
cable which looks like a SCSI one?
Congratulations, you are a proud owner of
a qic02 streamer. So use the qic02 driver (char devices),
and be sure to enable dynamic configuration
and to get the support utilities from sunsite
or funet (not sure..). The archive also contains
documentation about the interface card.
Thomas
Robert A. Kiesling wrote:
>
> I've looked through the FAQs, and can find no obvious answer to finding the
> correct host driver for a 16-bit (Xt-bus) Wangtek controller and tape drive.
>
> The controller and drive doesn't respond to any of the standard "aha", etc.
> modules.
>
> Is there source available for these animals, and docs, and if so, where?
>
