[1944] in linux-scsi channel archive
SCSI-Problem
daemon@ATHENA.MIT.EDU (KD)
Tue Jun 3 05:26:31 1997
Date: Tue, 3 Jun 1997 04:54:35 -0400
From: KD <KDombrofsky@compuserve.com>
To: "linux-scsi@vger.rutgers.edu" <linux-scsi@vger.rutgers.edu>
Hello there,
i've a problem with a tape-drive.
My config is:
Hardware: P100 with Adaptec 2940UW and a raid-system
and a Symbios NCR8150S with CDRom, TDC3040 ( 2.5
GB-tape), MO-drive, Jaz-drive ( last device ).
Software: Kernel 2.0.25 SuSE-Distribution
Adaptec AIC7xxx driver version: 4.0/3.2/4.0
Symbios ncr53c7xx driver dated: 30. Sept. 96
Bios-Version > 4.x.x
Problem: When copying a tape to the MO-drive i often get the following
message:
Jun 3 09:40:03 linux1 kernel: scsi : aborting command due to timeout : pid
173557, scsi1, channel 0, id 3, lun 0 0x0a 00 00 22 04 00
Jun 3 09:40:03 linux1 kernel: scsi1 : DANGER : command running, can not
abort.
Jun 3 09:40:03 linux1 kernel: scsi : aborting command due to timeout : pid
173558, scsi1, channel 0, id 3, lun 0 0x0a 00 33 dc 18 00
Jun 3 09:40:03 linux1 kernel: scsi1 : found command 173558 in Linux issue
queue
Jun 3 09:40:03 linux1 kernel: scsi : aborting command due to timeout : pid
173559, scsi1, channel 0, id 3, lun 0 0x0a 00 40 2a 04 00
Jun 3 09:40:03 linux1 kernel: scsi1 : found command 173559 in Linux issue
queue
Jun 3 09:40:19 linux1 kernel: scsi : aborting command due to timeout : pid
173557, scsi1, channel 0, id 3, lun 0 0x0a 00 00 22 04 00
Jun 3 09:40:19 linux1 kernel: scsi1 : DANGER : command running, can not
abort.
Jun 3 09:40:19 linux1 kernel: SCSI host 1 abort (pid 173557) timed out -
resetting
Jun 3 09:40:19 linux1 kernel: SCSI bus is being reset for host 1 channel
0.
Jun 3 09:40:19 linux1 kernel: scsi1 : DCMD|DBC=0x820b0000, DNAD=0x1885c
(virt 0x0001885c)
Jun 3 09:40:19 linux1 kernel: DSA=0xc481e8 (virt 0x00c481e8)
Jun 3 09:40:19 linux1 kernel: DSPS=0x1884c, TEMP=0xc480ac (virt
0x00c480ac), DMODE=0x88
Jun 3 09:40:19 linux1 kernel: SXFER=0x0, SCNTL3=0x3
Jun 3 09:40:19 linux1 kernel: BSY phase=CMDOUT, 0 bytes in SCSI
FIFO
Jun 3 09:40:19 linux1 kernel: STEST0=0x7
Jun 3 09:40:19 linux1 kernel: scsi1 : DSP 0x18854 (virt 0x00018854) ->
Jun 3 09:40:19 linux1 kernel: 0x18854 (virt 0x00018854) : 0x820b0000
0x0001884c (virt 0x0001884c)
Jun 3 09:40:19 linux1 kernel: 0x1885c (virt 0x0001885c) : 0x8f0b0000
0x00018a04 (virt 0x00018a04)
Jun 3 09:40:19 linux1 kernel: 0x18864 (virt 0x00018864) : 0x9e0b0000
0x00000000 (virt 0x00000000)
Jun 3 09:40:19 linux1 kernel: 0x1886c (virt 0x0001886c) : 0x800b0000
0x0001888c (virt 0x0001888c)
Jun 3 09:40:19 linux1 kernel: 0x18874 (virt 0x00018874) : 0x810b0000
0x000188e4 (virt 0x000188e4)
Jun 3 09:40:19 linux1 kernel: 0x1887c (virt 0x0001887c) : 0x830b0000
0x00018c0c (virt 0x00018c0c)
Jun 3 09:40:19 linux1 kernel: scsi1 : connected (SDID=0x5, SSID=0x4)
Jun 3 09:40:19 linux1 kernel: scsi1 : dsa at phys 0xc481e8 (virt
0x00c481e8)
Jun 3 09:40:19 linux1 kernel: + 64 : dsa_msgout length = 1, data =
0xc4802c (virt 0x00c4802c)
Jun 3 09:40:19 linux1 kernel: 80
Jun 3 09:40:19 linux1 kernel: + 60 : select_indirect = 0x3050000
Jun 3 09:40:19 linux1 kernel: + 56 : dsa_cmnd = 0xfee410
result = 0xffff, target = 5, lun = 0, cmd = 0x01 00 00 00 00 00
Jun 3 09:40:19 linux1 kernel: + 48 : dsa_next = 0x0
Jun 3 09:40:19 linux1 kernel: scsi1 target 5 : sxfer_sanity = 0x0,
scntl3_sanity = 0x3
Jun 3 09:40:19 linux1 kernel: script : 0x78030300 0x0
0x78050000 0x0 0x90080000 0x0 0x0 0x0
Jun 3 09:40:19 linux1 kernel: scsi1 : saved data pointer at offset 0
Jun 3 09:40:19 linux1 kernel: scsi1 : active data pointer at offset 0
Jun 3 09:40:20 linux1 kernel: scsi1 : issue queue
Jun 3 09:40:20 linux1 kernel: scsi1 : dsa at phys 0x19d8080 (virt
0x019d8080)
Jun 3 09:40:20 linux1 kernel: + 64 : dsa_msgout length = 99812,
data = 0x0 (virt 0x00000000)
Jun 3 09:40:20 linux1 kernel: + 60 : select_indirect = 0xc0000004
Jun 3 09:40:20 linux1 kernel: + 56 : dsa_cmnd = 0x0
Jun 3 09:40:20 linux1 kernel: + 48 : dsa_next = 0x0
Jun 3 09:40:20 linux1 kernel: scsi1 : dsa at phys 0xc4a080 (virt
0x00c4a080)
Jun 3 09:40:20 linux1 kernel: + 64 : dsa_msgout length = 99812,
data = 0x0 (virt 0x00000000)
Jun 3 09:40:20 linux1 kernel: + 60 : select_indirect = 0xc0000004
Jun 3 09:40:20 linux1 kernel: + 56 : dsa_cmnd = 0x0
Jun 3 09:40:20 linux1 kernel: + 48 : dsa_next = 0x0
Jun 3 09:40:20 linux1 kernel: scsi1 : schedule dsa array :
Jun 3 09:40:20 linux1 kernel: scsi1 : dsa at phys 0x6ee080 (virt
0x006ee080)
Jun 3 09:40:20 linux1 kernel: + 64 : dsa_msgout length = 99812,
data = 0x1a218 (virt 0x0001a218)
Jun 3 09:40:20 linux1 kernel: + 60 : select_indirect = 0xc0000004
Jun 3 09:40:20 linux1 kernel: + 56 : dsa_cmnd = 0x0
Jun 3 09:40:20 linux1 kernel: + 48 : dsa_next = 0x0
Jun 3 09:40:20 linux1 kernel: scsi1 : end schedule dsa array
Jun 3 09:40:20 linux1 kernel: scsi1 : reconnect_dsa_head :
Jun 3 09:40:20 linux1 kernel: scsi1 : end reconnect_dsa_head
Jun 3 09:40:20 linux1 kernel: The sti() implicit in a printk() prevents
hangs
Jun 3 09:40:20 linux1 kernel: scsi : aborting command due to timeout : pid
173558, scsi1, channel 0, id 3, lun 0 0x0a 00 33 dc 18 00
Jun 3 09:40:20 linux1 kernel: scsi1 : did this command ever run?
Jun 3 09:40:20 linux1 kernel: scsi1 : target 3 accepting asynchronous SCSI
Jun 3 09:40:20 linux1 kernel: scsi1 : setting target 3 to asynchronous
SCSI
Jun 3 09:40:20 linux1 kernel: scsi : aborting command due to timeout : pid
173559, scsi1, channel 0, id 3, lun 0 0x0a 00 40 2a 04 00
Jun 3 09:40:20 linux1 kernel: scsi1 : did this command ever run?
After the scsireset the cpio-command hangs and i have to reboot the
machine.
Has anyone any ideas ?
Thanks
Klaus-Peter
