[1758] in linux-scsi channel archive
SCSI Tape Error Messages
daemon@ATHENA.MIT.EDU (Matt Sapp)
Fri Apr 25 16:40:36 1997
Date: Fri, 25 Apr 1997 15:38:39 -0500 (CDT)
From: Matt Sapp <matt@manc.edu>
To: linux-scsi@vger.rutgers.edu
I wrote the list about this message a couple weeks ago, and it is still
persistant in coming back, even after a kernel recompilation and machine
reboot.... This is my HP SureStore 6000 on the external channel of an
Adaptec 3940UW. it appears to get about 30 minutes into a backup, and then
dies. The backup is just a "tar -cvb 256 -f /dev/nst0 /xxxx" where xxxx is
a directory off the root directory. It has worked for about 2 months now,
since we got the drive, but all of a sudden its not =/.. Could this be a
cable error? Termination? Anything else?
Matt
scsi : aborting command due to timeout : pid 2496516, scsi1,
channel 0, id 0, lun 0 0x0a 00 02 00 00 00
aic7xxx: (abort) Aborting scb 0, TCL 0/0/0
scsi : aborting command due to timeout : pid 2496516, scsi1, channel 0, id
0, lun 0 0x0a 00 02 00 00 00
aic7xxx: (abort) Aborting scb 0, TCL 0/0/0
SCSI host 1 abort (pid 2496516) timed out - resetting
SCSI bus is being reset for host 1 channel 0.
aic7xxx: (reset) target/channel 0/0
aic7xxx: (abort_reset) scb state 0x1, Data-Out phase, SCSISIGI = 0x4
aic7xxx: (reset_device) target/channel -1/A, active_scb 0
aic7xxx: (match_scb) comparing target/channel -1/A to scb 0/A
aic7xxx: (reset_channel) Resetting current channel A
aic7xxx: (reset_channel) Channel reset, sequencer restarted
aic7xxx: (done_aborted_scbs) Aborting scb 0, TCL=0/0/0
st0: Error with sense data: extra data not valid Current error st09:00:
sns = 70 6
ASC=29 ASCQ= 0
Raw sense data:0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x0e 0x00 0x00 0x00 0x00
0x29
0x00 0x00 0x00
scsi1: Target 0, channel A, now synchronous at 10.0MHz, offset 8.
