[1710] in linux-scsi channel archive
daemon@ATHENA.MIT.EDU (Matt Sapp)
Mon Apr 14 14:51:55 1997
Date: Mon, 14 Apr 1997 13:15:14 -0500
To: linux-scsi@vger.rutgers.edu
From: Matt Sapp <matt@manc.edu>
I got the following messages on my screen this morning. This is on an
Adaptec 3940UW controller, the scsi device giving the error (if i read this
right) is a HP SureStore Tape 6000.. Any ideas what could cause this, and
what it means? Is it deadly? The tape drive is an external, and is the
only device on this channel of the controller.
scsi : aborting command due to timeout : pid 5074775, scsi1,
channel 0, id 0, lun 0 0x0a 00 02 00 00 00
aic7xxx: (abort) Aborting scb 0, TCL 0/0/0
scsi : aborting command due to timeout : pid 5074775, scsi1, channel 0, id
0, lun 0 0x0a 00 02 00 00 00
aic7xxx: (abort) Aborting scb 0, TCL 0/0/0
SCSI host 1 abort (pid 5074775) timed out - resetting
SCSI bus is being reset for host 1 channel 0.
aic7xxx: (reset) target/channel 0/0
aic7xxx: (abort_reset) scb state 0x1, Data-Out phase, SCSISIGI = 0x4
aic7xxx: (reset_device) target/channel -1/A, active_scb 0
aic7xxx: (match_scb) comparing target/channel -1/A to scb 0/A
aic7xxx: (reset_channel) Resetting current channel A
aic7xxx: (reset_channel) Channel reset, sequencer restarted
aic7xxx: (done_aborted_scbs) Aborting scb 0, TCL=0/0/0
st0: Error with sense data: extra data not valid Current error st09:00:
sns = 70 6
ASC=29 ASCQ= 0
Raw sense data:0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x0e 0x00 0x00 0x00 0x00
0x29
0x00 0x00 0x00
scsi1: Target 0, channel A, now synchronous at 10.0MHz, offset 8.
_______________________________________________________________________
| Matt Sapp | http://lion.manc.edu/caraudio |
| matt@manc.edu | #caraudio - [DeW] |
| MidAmerica Nazarene College UNIX Administrator |
-----------------------------------------------------------------------
For PGP sig finger matt@lion.manc.edu
