[1318] in linux-scsi channel archive
NCR53C8XX (BSD ported) 16e for 2.0.28, Hard error.
daemon@ATHENA.MIT.EDU (James W. Laferriere)
Mon Jan 27 00:05:03 1997
Date: Sun, 26 Jan 1997 22:05:35 -0800 (PST)
From: "James W. Laferriere" <babydr@nwrain.net>
To: Gerard Roudier <groudier@club-internet.fr>
cc: linux-scsi@vger.rutgers.edu, ncr53c810@colorado.edu
In-Reply-To: <Pine.LNX.3.91.961218012955.294A-100000@localhost>
+scsi: Aborting Command due to timeout : pid 15832 :
Scsi 0 : Channel 0 : ID 0 : Lun 0 write (6) 05 2f cb f4 00
Found the above on the -locked- console this morning
I haven't attempted to run that kernel since. It's on
floppy so that I had my stable kernel still available.
To be very honest I am not sure if there isn't something
else conflicting (in some manner) with the scsi controller
or software.
All I could do was -power off-, I tried the three
finger salute & the reset button - the reset button
restarted the system although the disk activity light
stayed -on- IE: no flashing,.....
/dev/sda1 was in very unstable state, on reboot the
system came back with 'reboot emmediately', so I got
out my ncr53c8xx/slackware boot & recovery disks.
My .config & a dmesg file are at the bottom,
if there is any other info I can provide please feel
to contact me.
Slackware96/3.1, AMD-5k86p90, 128MB memory,
Linux-2.0.28 , eepro100.c:v0.23 1/24/97 in kernel
No Module support, ncr53c8xx.c:v1.16e 1/12/97 in kernel.
Gcc v. 2.7.2 ; binutils-2.6.0.14 ; sysvinit-2.62
ld.so.1.7.14 ; libc.so.5.3.12 ; libc.so.4.7.6
libg++.so.27.1.4 ;
proc-ps 0.99 ; net-tools 1.2.0 ; mount-2.5j
Modules 2.0.0 ; loadkeys 0.89 ;
Tia, JimL
_________________________________________
| James W. Laferriere | Network Engineer |
| babydr@nwrain.net | System Techniques |
| 25416 - 22nd S. | Kent, WA 98032 |
| Give me VMS -or- Give me Linux |
| but only on AXP |
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
--- Linux-Vax Port, Still in Progress . IE: No Progress To Report. ;-) ---
--- .config --- from offending kernel build
#
# Automatically generated by make menuconfig: don't edit
#
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
#
# Loadable module support
#
# CONFIG_MODULES is not set
#
# General setup
#
# CONFIG_MATH_EMULATION is not set
CONFIG_NET=y
# CONFIG_MAX_16M is not set
CONFIG_PCI=y
CONFIG_PCI_OPTIMIZE=y
CONFIG_SYSVIPC=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_JAVA is not set
CONFIG_KERNEL_ELF=y
CONFIG_M586=y
#
# Floppy, IDE, and other block devices
#
CONFIG_BLK_DEV_FD=y
CONFIG_BLK_DEV_IDE=y
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDE_PCMCIA is not set
CONFIG_BLK_DEV_CMD640=y
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
CONFIG_BLK_DEV_RZ1000=y
CONFIG_BLK_DEV_TRITON=y
# CONFIG_IDE_CHIPSETS is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_MD is not set
CONFIG_BLK_DEV_RAM=y
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_BLK_DEV_XD is not set
# CONFIG_BLK_DEV_HD is not set
#
# Networking options
#
# CONFIG_FIREWALL is not set
CONFIG_NET_ALIAS=y
CONFIG_INET=y
CONFIG_IP_FORWARD=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ACCT=y
# CONFIG_IP_ROUTER is not set
CONFIG_NET_IPIP=y
# CONFIG_IP_MROUTE is not set
CONFIG_IP_ALIAS=y
# CONFIG_INET_PCTCP is not set
CONFIG_INET_RARP=y
# CONFIG_NO_PATH_MTU_DISCOVERY is not set
CONFIG_IP_NOSR=y
CONFIG_SKB_LARGE=y
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_AX25 is not set
# CONFIG_BRIDGE is not set
# CONFIG_NETLINK is not set
#
# SCSI support
#
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
CONFIG_BLK_DEV_SR=y
CONFIG_CHR_DEV_SG=y
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
#
# SCSI low-level drivers
#
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AHA1740 is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA_DMA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_NCR53C7xx is not set
CONFIG_SCSI_NCR53C8XX=y
# CONFIG_SCSI_NCR53C8XX_TAGGED_QUEUE is not set
# CONFIG_SCSI_NCR53C8XX_IOMAPPED is not set
CONFIG_SCSI_NCR53C8XX_MAX_TAGS=4
CONFIG_SCSI_NCR53C8XX_SYNC=5
# CONFIG_SCSI_NCR53C8XX_NO_DISCONNECT is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_SEAGATE is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
#
# Network device support
#
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
# CONFIG_EQUALIZER is not set
# CONFIG_DLCI is not set
# CONFIG_PLIP is not set
CONFIG_PPP=y
# CONFIG_SLIP is not set
# CONFIG_NET_RADIO is not set
CONFIG_NET_ETHERNET=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_ISA is not set
CONFIG_NET_EISA=y
# CONFIG_AC3200 is not set
CONFIG_EEPRO100=y
# CONFIG_APRICOT is not set
# CONFIG_DE4X5 is not set
# CONFIG_DEC_ELCP is not set
# CONFIG_DGRS is not set
# CONFIG_ZNET is not set
# CONFIG_NET_POCKET is not set
# CONFIG_TR is not set
# CONFIG_FDDI is not set
# CONFIG_ARCNET is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# CD-ROM drivers (not for SCSI or IDE/ATAPI drives)
#
# CONFIG_CD_NO_IDESCSI is not set
#
# Filesystems
#
# CONFIG_QUOTA is not set
# CONFIG_LOCK_MANDATORY is not set
CONFIG_MINIX_FS=y
# CONFIG_EXT_FS is not set
CONFIG_EXT2_FS=y
CONFIG_XIA_FS=y
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
# CONFIG_UMSDOS_FS is not set
CONFIG_PROC_FS=y
CONFIG_NFS_FS=y
# CONFIG_ROOT_NFS is not set
CONFIG_SMB_FS=y
CONFIG_SMB_WIN95=y
CONFIG_ISO9660_FS=y
CONFIG_HPFS_FS=y
CONFIG_SYSV_FS=y
CONFIG_AFFS_FS=y
CONFIG_AMIGA_PARTITION=y
CONFIG_UFS_FS=y
CONFIG_BSD_DISKLABEL=y
CONFIG_SMD_DISKLABEL=y
#
# Character devices
#
CONFIG_SERIAL=y
# CONFIG_DIGI is not set
# CONFIG_CYCLADES is not set
# CONFIG_STALDRV is not set
# CONFIG_RISCOM8 is not set
CONFIG_PRINTER=y
# CONFIG_MOUSE is not set
# CONFIG_UMISC is not set
# CONFIG_QIC02_TAPE is not set
# CONFIG_FTAPE is not set
# CONFIG_APM is not set
# CONFIG_WATCHDOG is not set
# CONFIG_RTC is not set
#
# Sound
#
# CONFIG_SOUND is not set
#
# Kernel hacking
#
# CONFIG_PROFILE is not set
--- dmesg --- ( sort of )
This is the K5 patch thingie.
detecting Vendor: AuthenticAMD.
AMD detected.
detecting CPU: 5.
K5 detected.
detecting model: 0.
Model 0 detected.
Tweaking cycle counter logic.
Console: 16 point font, 400 scans
Console: colour VGA+ 80x25, 1 virtual console (max 63)
pcibios_init : BIOS32 Service Directory structure at 0x000fabf0
pcibios_init : BIOS32 Service Directory entry at 0xfb0b0
pcibios_init : PCI BIOS revision 2.10 entry at 0xfb0e0
Probing PCI hardware.
Warning : Unknown PCI device (1013:b8). Please read include/linux/pci.h
Calibrating delay loop.. ok - 179.81 BogoMIPS
Memory: 64032k/66496k available (848k kernel code, 384k reserved, 1232k data)
Swansea University Computer Society TCP/IP for NET3.034
IP Protocols: IGMP, ICMP, UDP, TCP, IPIP
Checking 386/387 coupling... Ok, fpu using exception 16 error reporting.
Checking 'hlt' instruction... Ok.
Linux version 2.0.28 (root@filesrv1) (gcc version 2.7.2) #1 Sat Jan 25 20:28:54 PST 1997
Ramdisk driver initialized : 16 ramdisks of 4096K size
ide: i82371 PIIX (Triton) on PCI bus 0 function 57
ide0: BM-DMA at 0x3000-0x3007
ide1: BM-DMA at 0x3008-0x300f
Started kswapd v 1.4.2.2
ncr53c8xx: at PCI bus 0, device 18, function 0
ncr53c8xx: unit=0 chip=810 rev=0x11 base=0xf1101000, io_port=0x6000, irq=10
ncr53c810-0: using memory mapped IO at virtual address 0x4841000
ncr53c810-0: requesting shared irq 10 (dev_id=0x84068)
ncr53c810-0: restart (scsi reset).
ncr53c810-0: final value of dmode/ctest4/ctest5 = 0xce/0x00/0x00
ncr53c8xx: at PCI bus 0, device 20, function 0
ncr53c8xx: unit=1 chip=810 rev=0x11 base=0xf1102000, io_port=0x6200, irq=12
ncr53c810-1: using memory mapped IO at virtual address 0x4843000
ncr53c810-1: requesting shared irq 12 (dev_id=0x80068)
ncr53c810-1: restart (scsi reset).
ncr53c810-1: final value of dmode/ctest4/ctest5 = 0xce/0x00/0x00
scsi0 : ncr53c8xx - revision 1.16e
scsi1 : ncr53c8xx - revision 1.16e
scsi : 2 hosts.
Vendor: SEAGATE Model: ST11200N Rev: 3124
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
Vendor: IMPRIMIS Model: 94601-15 Rev: 3023
Type: Direct-Access ANSI SCSI revision: 01 CCS
Detected scsi disk sdb at scsi0, channel 0, id 1, lun 0
Vendor: PIONEER Model: CD-ROM DR-124X Rev: 1.06
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr0 at scsi1, channel 0, id 6, lun 0
scsi : detected 1 SCSI cdrom 2 SCSI disks total.
ncr53c810-0-<0,0>: 5.0 MB/s (200 ns, offset 8)
SCSI device sda: hdwr sector= 512 bytes. Sectors= 2059140 [1005 MB] [1.0 GB]
SCSI device sdb: hdwr sector= 512 bytes. Sectors= 2037738 [994 MB] [1.0 GB]
Found Intel i82557 PCI Speedo at I/O 0x6100, IRQ 9.
PCI latency timer (CFLT) is 0x20.
eepro100.c:v0.23 1/24/97 Donald Becker linux-eepro100@cesdis.gsfc.nasa.gov
DP83840 specific setup...
eepro100.c:v0.23 1/24/97 Donald Becker linux-eepro100@cesdis.gsfc.nasa.gov
Partition check:
sda: sda1 sda2
sdb: sdb1
VFS: Mounted root (ext2 filesystem) readonly.
Adding Swap: 130748k swap-space
ncr53c810-1-<6,0>: 4.0 MB/s (250 ns, offset 8)
ISO9660 Extensions: RRIP_1991A
eth0: Transmit timed out: status 0050 command 0000.
eth0: Tx timeout fill index 20 scavenge index 6.
Tx queue 000ca000 000ca000 000ca000 400ca000 0000a000 0000a000 00000000 00000000 0000a000 000ca000 000ca000 000ca000 000ca000 000ca000 000ca000 000ca000.
Rx ring 00000003 00000003 00000003 00000003 00000003 00000003 00000003 00000003 00000003 c0000003 00000001 00000001 00000001 00000001 00000001 00000002.
eth0: Trying to restart the transmitter...
eth0: Transmit timed out: status 0050 command 0000.
eth0: Tx timeout fill index 21 scavenge index 7.
Tx queue 000ca000 000ca000 000ca000 000ca000 400ca000 0000a000 0000a000 00000000 0000a000 000ca000 000ca000 000ca000 000ca000 000ca000 000ca000 000ca000.
Rx ring 00000003 00000003 00000003 00000003 00000003 c0000003 00000003 00000003 00000003 00000003 00000003 00000003 00000003 00000003 00000003 00000003.
eth0: Trying to restart the transmitter...
gated[63]: task_get_port: getservbyname("gii", "tcp") failed, using port 616
