[1000] in linux-scsi channel archive
ncr53c8xx panic
daemon@ATHENA.MIT.EDU (Dan Hollis)
Sat Nov 23 03:46:31 1996
Date: Sat, 23 Nov 1996 01:38:47 -0800 (PST)
From: Dan Hollis <goemon@sasami.anime.net>
To: Gerard Roudier <groudier@club-internet.fr>
cc: linux-scsi@vger.rutgers.edu, linux-raid@vger.rutgers.edu
In-Reply-To: <Pine.LNX.3.91.961117151730.159B-100000@localhost>
Linux 2.0.25
From dmesg:
-----------
ncr53c8xx : at PCI bus 0, device 14, function 0
ncr_attach: unit=0 chip=810 base=f0000000, io_port=6000, irq=12
ncr53c810-0: using memory mapped IO at virtual address 0x488b000
ncr53c810-0: assuming 40MHz clock
ncr53c810-0: initial value of SCNTL3 = 03, final = 13
ncr53c810-0: requesting shared irq 12 (dev_id=0xb10068)
ncr53c810-0: restart (scsi reset).
scsi0 : ncr53c8xx (rel 1.12c)
scsi : 1 host.
Vendor: SEAGATE Model: ST43400N Rev: 1027
Type: Direct-Access ANSI SCSI revision: 02
Vendor: SEAGATE Model: ST43400N Rev: 1022
Type: Direct-Access ANSI SCSI revision: 02
Vendor: SEAGATE Model: ST43400N Rev: 1027
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sda at scsi0, channel 0, id 1, lun 0
Detected scsi disk sdb at scsi0, channel 0, id 2, lun 0
Detected scsi disk sdc at scsi0, channel 0, id 3, lun 0
ncr53c810-0-<target 1, lun 0>: FAST SCSI-2 100ns (10 Mb/sec) offset 8.
SCSI device sda: hdwr sector= 512 bytes. Sectors= 5688447 [2777 MB] [2.8 GB]
sda: sda1
ncr53c810-0-<target 2, lun 0>: FAST SCSI-2 100ns (10 Mb/sec) offset 8.
SCSI device sdb: hdwr sector= 512 bytes. Sectors= 5688447 [2777 MB] [2.8 GB]
sdb: sdb1
ncr53c810-0-<target 3, lun 0>: FAST SCSI-2 100ns (10 Mb/sec) offset 8.
SCSI device sdc: hdwr sector= 512 bytes. Sectors= 5688447 [2777 MB] [2.8 GB]
sdc: sdc1
raid0 personality registered
REGISTER_DEV sda1 to md0 done
REGISTER_DEV sdb1 to md0 done
REGISTER_DEV sdc1 to md0 done
START_DEV md0 raid0
When it crashed (I had to write this down by hand)
----------------
ncr53c810-0:3: ERROR (80:48) (8-28-0) (8/13) @ (14c0:88030000).
script cmd = 18000000
reg: da 10 80 13 47 08 03 1f 01 08 83 28 80 00 08 00.
ncr53c810-0: restart (fatal error).
ncr53c810-0-0-<target 3, lun 0>: COMMAND FAILED (9 ff) @00fed018.
ncr53c810-0-0-<target 2, lun 0>: COMMAND FAILED (9 ff) @00fee810.
ncr53c810-0-0-<target 1, lun 0>: COMMAND FAILED (9 ff) @00fee018.
scsi : aborting command due to timeout : pid 6487419, scsi0, channel 0, id 3,
lun 0 Write (6) 09 95 b0 02 00
ncr53c8xx_abort : abort call
Then the machine was locked hard. No ping, no console switching.
-Dan
