[7551] in Release_7.7_team
Re: install failure
daemon@ATHENA.MIT.EDU (Jonathan Reed)
Tue Jul 26 10:56:43 2011
Mime-Version: 1.0 (Apple Message framework v1084)
Content-Type: text/plain; charset=us-ascii
From: Jonathan Reed <jdreed@MIT.EDU>
In-Reply-To: <7813A033ABE64A41BE07B89F0EDFED3423D45F7071@EXPO22.exchange.mit.edu>
Date: Tue, 26 Jul 2011 10:56:36 -0400
Cc: Geoffrey G Thomas <geofft@mit.edu>,
"release-team@mit.edu" <release-team@mit.edu>
Message-Id: <7DA8DB8A-B27C-4943-8F9A-E6C0A7359136@mit.edu>
To: "Pam Nicholas" <pmn@mit.edu>
Content-Transfer-Encoding: 8bit
Hi Pam,
I just tested the installer and it was able to successfully configure the correct IP addresses for those hostnames. Obviously, I can't test any further than that since I'm not in E53 or building 14, respectively. I would normally suspect some local network problem, but obviously if you were able to boot over the network, that's not the case. I can meet you in Dewey Library at some point this week and take a look in person, if you send me some times when you're available. Something strange may be going on on the E53 network, as the cluster services team also had a problem installing another machine in Dewey (dew-ref-1), with a similar failure.
-Jon
On Jul 26, 2011, at 10:37 AM, Pam Nicholas wrote:
> I entered hostnames -- lib-adew-01 and lib-pre-01
>
> -----Original Message-----
> From: Jonathan Reed [mailto:jdreed@MIT.EDU]
> Sent: Tuesday, July 26, 2011 5:22 AM
> To: Pam Nicholas
> Cc: Geoffrey G Thomas; release-team@mit.edu
> Subject: Re: install failure
>
> Hi Pam,
>
> This indicates some error in the networking configuration at installation time. When the installer prompted for an IP address after you selected a cluster installation, can you let us know what value you entered?
>
> -Jon
>
> On Jul 25, 2011, at 4:03 PM, Pam Nicholas wrote:
>
>> Hi,
>>
>> Any ideas on this?
>>
>> Thanks.
>> Pam
>>
>> -----Original Message-----
>> From: Pam Nicholas
>> Sent: Friday, July 22, 2011 12:02 PM
>> To: Geoffrey Thomas
>> Subject: RE: install failure
>>
>>
>>
>> chmod: kexec: No such file or directory
>>
>> and then later
>>
>> debathena/installer.sh: line 312: ./kexec: not found
>>
>> Nothing displays when I type ls -l /h
>> ________________________________________
>> From: Geoffrey Thomas [geofft@MIT.EDU]
>> Sent: Thursday, July 21, 2011 12:24 PM
>> To: Pam Nicholas
>> Cc: release-team@mit.edu
>> Subject: Re: install failure
>>
>> Hi Pam,
>>
>> Were there errors earlier on the screen about downloading the kexec file?
>> (You can use Shift-PgUp and Shift-PgDn to scroll back.)
>>
>> Can you run "ls -l /h" at the debugging shell and let us know what the
>> output is?
>>
>> Thanks,
>> --
>> Geoffrey Thomas
>> IS&T Athena Release Team
>> release-team@mit.edu
>>
>> On Thu, 21 Jul 2011, Pam Nicholas wrote:
>>
>>>
>>> I am trying to install debathena, the cluster version, on Optiplex 740 and 745 computers. Both failed with the message
>>>
>>> Line312 ./kexec: not found
>>>
>>> Secondary installed failed
>>>
>>>
>>>
>>> Any advice?
>>>
>>>
>>>
>>> Thanks
>>>
>>> Pam
>>>
>>>
>>>
>>> ---
>>>
>>> Pam Nicholas
>>> Computer Support Manager
>>> MIT Libraries, Rm E25-131
>>> Cambridge, MA 02139
>>> 617-253-1612
>>> pmn@mit.edu
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>