[7260] in Hotline Meeting
Is Port On??
daemon@ATHENA.MIT.EDU (errol@TCM.mit.edu)
Fri Dec 27 11:13:46 1991
To: sgoldman@TCM.mit.edu, bigsteve@MIT.EDU, bwmelans@MIT.EDU, hotline@MIT.EDU
Cc: ljr@TCM.mit.edu, whishmeh@TCM.mit.edu, bshannon@TCM.mit.edu,
Date: Fri, 27 Dec 91 11:09:13 EST
From: errol@TCM.mit.edu
Are all the thinwire outlets on all three tiers of desks not working?
If it is only a single location, it could be that it is the one being
supported by the BNC port on the IRM board. If I can recall, wasn't that port
being turned off and on for some reason via SNMP by Network?
Errol
------- Forwarded Message
Return-Path: bigsteve@MIT.EDU
Received: from EYEBEAM.MIT.EDU by MIT.EDU with SMTP
id AA19039; Fri, 27 Dec 91 10:17:10 EST
Message-Id: <9112271517.AA19039@MIT.EDU>
Date: Fri, 27 Dec 91 10:16:04 EST
From: bigsteve@MIT.EDU (Steven M. Riester)
To: telecomts@MIT.EDU, trans-trb@MIT.EDU
Subject: Thin install in 1-115
Cc: bwmelans@MIT.EDU, hotline@MIT.EDU
Hi all,
I thought the network installation for 1-115 was finished. Can someone take a
look at this.
Steve
- ------- Forwarded Message
From: bwmelans@Athena.MIT.EDU
To: net-help@Athena.MIT.EDU
Cc: op@Athena.MIT.EDU
Subject: 1-115
Date: Thu, 26 Dec 91 18:33:54 EST
I have been trying to install DECstation 3100's in this location for
an hour now. I happened to find a tranciever box with the proper cables and
plugged it into the jack underneath the black board. I was able to install
a workstation using this method. Could someone look into getting the thin
ethernet working properly. I know this isn't working because after I installed
with the UTP drop, I switched it back to thin and lost connection to AFS
and system software. Thanks...
Brian Melanson (x3-7675)
Systems Support
- ------- End of Forwarded Message
------- End of Forwarded Message
