[56460] in Hotline Meeting

home help back first fref pref prev next nref lref last post

Re: Case 232381

daemon@ATHENA.MIT.EDU (Antoinette Browne)
Tue Sep 18 08:08:19 2001

Message-Id: <200109181208.IAA24037@melbourne-city-street.mit.edu>
Date: Tue, 18 Sep 2001 08:10:42 -0400
To: "Louis A. Isgur" <larugsi@MIT.EDU>, cg@MIT.EDU, 3help@MIT.EDU,
        larugsi@MIT.EDU
From: Antoinette Browne <ajames@MIT.EDU>
Cc: hotline@MIT.EDU, bmurphy@MIT.EDU, iggy@MIT.EDU, vdist-repl@MIT.EDU
In-Reply-To: <200109180122.VAA08885@killer.mit.edu>
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"

I will forward this information to the JCI technician.



Thanks
Toni Browne







At 09:22 PM 9/17/01 -0400, Louis A. Isgur wrote:
>Hi all,
>      It appears that port #4 (under port #2) on jack labeled 1-142-48 is not
>functioning. This was working prior to the fix. Port #4 also has the green
tab
>on it as well. Please address this issue.
>                                      Thanks Much,
>                                                 --Lou
>------- Forwarded Message
>
>Return-Path: <ajames@MIT.EDU>
>Received: from central-city-carrier-station.mit.edu by po11.mit.edu
(8.9.2/4.7) id PAA20036; Mon, 17 Sep 2001 15:03:22 -0400 (EDT)
>Received: from melbourne-city-street.mit.edu
(MELBOURNE-CITY-STREET.MIT.EDU [18.7.21.86])
>	by central-city-carrier-station.mit.edu (8.9.2/8.9.2) with ESMTP id
PAA14734;
>	Mon, 17 Sep 2001 15:03:22 -0400 (EDT)
>Received: from csr5 (AJAMES.MIT.EDU [18.142.1.149])
>	by melbourne-city-street.mit.edu (8.9.2/8.9.2) with SMTP id PAA29186;
>	Mon, 17 Sep 2001 15:03:22 -0400 (EDT)
>Message-Id: <200109171903.PAA29186@melbourne-city-street.mit.edu>
>X-Sender: ajames@hesiod
>X-Mailer: QUALCOMM Windows Eudora Pro Version 4.0.2 
>Date: Mon, 17 Sep 2001 15:05:40 -0400
>To: Chris Griffith <cg@mit.edu>, 3help@mit.edu
>From: Antoinette Browne <ajames@MIT.EDU>
>Subject: Re: Case 232381: Utp Jack 1-142-48 (PORT #2)
>Cc: LARUGSI@mit.edu, hotline@mit.edu, iggy@mit.edu, vdist-repl@mit.edu
>In-Reply-To: <a05101003b7cba910f040@[192.168.0.2]>
>References: <200109171238.IAA04209@hampster.mit.edu>
> <200109171238.IAA04209@hampster.mit.edu>
>Mime-Version: 1.0
>Content-Type: text/plain; charset="us-ascii"
>
>JCI replaced the jack and it tested ok.
>
>
>
>Thanks
>Toni Browne
>
>
>
>
>
>
>
>
>
>
>
>
>At 09:31 AM 9/17/01 -0400, Chris Griffith wrote:
>>This jack is NOT difficult to locate and I'm disappointed that JCI 
>>was unable to perform such a simple task.  3Help, please do what it 
>>takes to make JCI get this job done.  My team was short-staffed most 
>>of last week and I don't have time to do this kind of hand-holding.
>>
>>Here's some directions --  which should be enough for JCI:
>>Walk into the Athena cluster, go forward. Turn right so that you can 
>>walk to the far end of the cluster (opposite end from the printers). 
>>The jack is mounted on the far wall, just above table level.
>>
>>-Chris
>>
>>
>>
>>At 8:38 AM -0400 9/17/01, vdist-trb@MIT.EDU wrote:
>>>Date: Mon, 17 Sep 2001 08:40:47 -0400
>>>To: vdist-trb@MIT.EDU, 3help@MIT.EDU
>>>From: Antoinette Browne <ajames@MIT.EDU>
>>>Cc: LARUGSI@MIT.EDU, hotline@MIT.EDU
>>>Subject: Re: Case 232381: Utp Jack 1-142-48 (PORT #2)
>>>
>>>
>>>
>>>
>>>Hi Chris,
>>>
>>>
>>>The JCI technician would like you to check this location again.
>>>He went out and could not find a jack with label in room  1-142.
>>>If you could use one of the PC numbers to reference where the
>>>jack is, it would make it a lot easier for JCI to locate the jack.
>> 
>
>
>------- End of Forwarded Message
> 


home help back first fref pref prev next nref lref last post