[35206] in bugtraq
Re: Linksys WRT54G - Advice for european users
daemon@ATHENA.MIT.EDU (Richard Bjerregaard)
Wed Jun 9 16:00:26 2004
Date: Wed, 9 Jun 2004 00:15:06 +0200
From: Richard Bjerregaard <bjerregaard@jyde.dk>
Reply-To: Richard Bjerregaard <bjerregaard@jyde.dk>
Message-ID: <849732591.20040609001506@bjerregaard.net>
To: bugtraq@securityfocus.com
Cc: "Connor, Ethan M. W" <emconnor@hendersonbrothers.com>
In-Reply-To: <ED6ECA49A4AAC345A771F97A3B5E669201BD7B40@hb_commserv.hendersonbrothers.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 8bit
Hejsa Ethan
7. juni 2004, 18:56:18, you wrote:
CEMW> Another bit of warning about linksys and their inability to get the firmware
CEMW> release vs. hardware version worked out correctly. If you install the
CEMW> latest WAP54G firmware update for the v2 hardware on v1 or v1.1 hardware
CEMW> (which the readme says is supported)... Expect the ethernet port to disable
CEMW> itself (due to the order in which the interfaces are initialized on the
CEMW> device) after you power cycle it...
From the readme.txt
"
Note: If you try and upgrade an older unit to firmware 2.07 without upgrading
the firmware to 1.09.1 prior to upgrade, you may damage the Access
Point."
Checkout these links
http://www.linksys.com/international/firmware.asp?intfwid=9&coid=48
This document explains how to upgrade your WAP54G to firmware version 2.07.01
The procedure applies to V1.0 and V1.1 hardwares.
http://www.linksys.com/download/vertxt/WAP54GupgradeprocedureV2.doc
--
Best regards/Venlig hilsen
Richard Bjerregaard
