[11777] in bugtraq
Re: Cisco and Nmap Dos
daemon@ATHENA.MIT.EDU (Niklas Schiffler)
Thu Sep 9 10:39:04 1999
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Message-Id: <37CE8F1F.B79760FA@nightlabs.de>
Date: Thu, 2 Sep 1999 16:52:15 +0200
Reply-To: Niklas Schiffler <nick@NIGHTLABS.DE>
From: Niklas Schiffler <nick@NIGHTLABS.DE>
X-To: bugtraq@securityfocus.com
To: BUGTRAQ@SECURITYFOCUS.COM
"Lancashire, Andrew" wrote:
>
> I don't know if you've ever seen this before. We ran nmap with ICMP
> discover and standard tcp scan. We ran the scan against the entire 10.0.0.0
> network range. Although we were only looking for 2 ports, we found that the
> RSM in our 5500 series (our default route) was running out of memory and
> had to be rebooted by our Network Services group multiple times in the 18
> hour stretch it took to complete. One of the interesting things is that we
> were only generating about 3-5 Mbs and the 5500 can pass Gigabits. I have
> not heard of this problem before. We contacted Cisco and sent them the
> details. Below is the response to one of our engineers.
>
> Andrew
The same problem we had using a BinTec/BIANCA-BRICK XL router with NAT activated
on the internet interface. We didn't have to reboot it as it did by itself. The
problem occured in firmware version 4.8.3 and seems to be fixed in version 5.5.1.
Nick..
