[82891] in North American Network Operators' Group
Re: NETGEAR in the core...
daemon@ATHENA.MIT.EDU (Joe Maimon)
Sun Jul 31 01:57:36 2005
Date: Sun, 31 Jul 2005 01:57:02 -0400
From: Joe Maimon <jmaimon@ttec.com>
To: Robert Boyle <robert@tellurian.com>
Cc: Henry Yen <henry@AegisInfoSys.com>, nanog@merit.edu
In-Reply-To: <6.2.1.2.2.20050730235233.08b79bd0@mail.tellurian.com>
Errors-To: owner-nanog@merit.edu
Rob
>
>> Can a cisco 1600 run PPPoE?
>
>
> I've never tried it, but if they can run 12.2, they should do PPPoE.
>
> R
>
>
Only suitable one is the 1605R (because you would never dial on the same
ethernet that your lan is on right?)
20mb flash card and 16mb SIMM you have around and your up and running
with 12.3
Go with 1720 and 48/16flash and you still require a WIC-1ENET. (cheaper
than 1721 however since cisco pppoe dialer does not support dot1q [for
absolutely no good reason] it makes little difference)
Cisco has targeted this segment with the 83x series....they are fairly
decent but you would need to run 123T/124
You can also target this with the obsolete
2610,2620,2621,3620......using Network modules with additional ethernets.
Joe
