[80027] in North American Network Operators' Group
RE: Getting a BGP table in to a lab
daemon@ATHENA.MIT.EDU (Frotzler, Florian)
Thu Apr 21 04:36:25 2005
Date: Thu, 21 Apr 2005 10:35:02 +0200
From: "Frotzler, Florian" <Florian.Frotzler@one.at>
To: <nanog@merit.edu>
Errors-To: owner-nanog@merit.edu
Hi,
Zebra is outdated, the successor is called quagga (at least on debian)
and is capable of providing most of the vendor C BGP features, though
MD5 autentication is still experimental I think. We used to push a
handful of BGP full feeds on our quagga router and it didn't stumble a
bit. OSPF also works quite well, btw.
Florian
> -----Original Message-----
> From: owner-nanog@merit.edu [mailto:owner-nanog@merit.edu] On=20
> Behalf Of Scott Morris
> Sent: Donnerstag, 21. April 2005 02:50
> To: swm@emanon.com; 'Nathan Ward'; nanog@merit.edu
> Subject: RE: Getting a BGP table in to a lab
>=20
>=20
> Forget part of my reply here... I thought someone was=20
> posting from the CCIE forum stuff I do. =20
>=20
> So disregard the lack-of-caffeine-induced, retarded command=20
> about no router being able to support a full feed. :)
>=20
> My apologies....
>=20
> Zebra is still a good idea though!
>=20
> Scott=20
>=20
> -----Original Message-----
> From: owner-nanog@merit.edu [mailto:owner-nanog@merit.edu] On=20
> Behalf Of Scott Morris
> Sent: Wednesday, April 20, 2005 8:42 PM
> To: 'Nathan Ward'; nanog@merit.edu
> Subject: RE: Getting a BGP table in to a lab
>=20
>=20
> None of the routers that are tested in the lab are capable of=20
> supporting a full BGP feed....
>=20
> If you just want to play with BGP stuff, you can use Zebra=20
> (unix) or go to www.nantech.com and get their BGP4WIN program.
>=20
> That may help you a bit more.
>=20
> Scott=20
>=20
> -----Original Message-----
> From: owner-nanog@merit.edu [mailto:owner-nanog@merit.edu] On=20
> Behalf Of Nathan Ward
> Sent: Wednesday, April 20, 2005 8:35 PM
> To: nanog@merit.edu
> Subject: Getting a BGP table in to a lab
>=20
>=20
> I'm trying to come up with a way to get a full BGP routing=20
> table in to my lab.
> I'm not really fussed about keeping it up to date, so a=20
> snapshot is fine.
> At the moment, I'm thinking about spending a few hours=20
> hacking together a BGP daemon in perl to peer with and record=20
> a table from a production router, disconnect, and then start=20
> peering with lab routers.
>=20
> Am I reinventing a wheel here?
>=20
> --
> Nathan Ward
>=20
>=20
>=20
>=20
