[80022] in North American Network Operators' Group
RE: Getting a BGP table in to a lab
daemon@ATHENA.MIT.EDU (Scott Morris)
Wed Apr 20 20:41:24 2005
Reply-To: <swm@emanon.com>
From: "Scott Morris" <swm@emanon.com>
To: "'Nathan Ward'" <nanog@daork.net>, <nanog@merit.edu>
Date: Wed, 20 Apr 2005 20:41:30 -0400
In-Reply-To: <4266F526.6050803@daork.net>
Errors-To: owner-nanog@merit.edu
None of the routers that are tested in the lab are capable of supporting a
full BGP feed....
If you just want to play with BGP stuff, you can use Zebra (unix) or go to
www.nantech.com and get their BGP4WIN program.
That may help you a bit more.
Scott
-----Original Message-----
From: owner-nanog@merit.edu [mailto:owner-nanog@merit.edu] On Behalf Of
Nathan Ward
Sent: Wednesday, April 20, 2005 8:35 PM
To: nanog@merit.edu
Subject: Getting a BGP table in to a lab
I'm trying to come up with a way to get a full BGP routing table in to my
lab.
I'm not really fussed about keeping it up to date, so a snapshot is fine.
At the moment, I'm thinking about spending a few hours hacking together a
BGP daemon in perl to peer with and record a table from a production router,
disconnect, and then start peering with lab routers.
Am I reinventing a wheel here?
--
Nathan Ward
