[72872] in North American Network Operators' Group
Re: ATM/IP video
daemon@ATHENA.MIT.EDU (Robert Blayzor)
Thu Jul 29 08:29:58 2004
Date: Thu, 29 Jul 2004 08:29:22 -0400
From: Robert Blayzor <rblayzor@inoc.net>
To: Tracey Webb <Tracey.Webb@camtel.com>
Cc: nanog@nanog.org
In-Reply-To: <9E69F8C622BBE14C972E49D29C04988801284188@cammail.camtel.pri>
Errors-To: owner-nanog-outgoing@merit.edu
Tracey Webb wrote:
> I am attempting to bridge multiple ATM vc's on a single port OC12c in my
> Cisco 12008. The vc's are coming from VTC video equipment. Each vc is a
> different channel. I need to terminate it and pass over the IP's to my
> gigE port. Any suggestions.
Maybe this works...
interface ATM6/0
no ip address
!
interface ATM6/0.1 multipoint
range Video pvc 1/100 1/199
bridge-group 1
!
interface GigabitEthernet2/8
...
bridge-group 1
--
Robert Blayzor, BOFH
INOC, LLC
rblayzor@inoc.net
PGP: http://www.inoc.net/~dev/
Key fingerprint = 1E02 DABE F989 BC03 3DF5 0E93 8D02 9D0B CB1A A7B0
Life would be much easier if I had the source code.